• Leeson Keyed Shaft Drip-Proof Single Phase Less Base Jet Pump Motors

    • Keyed Shaft
    • Drip-Proof
    • Single Phase
    • Less Base
    General Specifications:
    Stator impregnated with extra heavy varnish system. High temperature copper magnet wire provides extended motor life. "Super Hush" flow-through ventilation system (exhaust shaft-end) standard. Vertical or horizontal mounting (drip-cover available). Ground provision. Die cast aluminum NEMA 56 C face mounting flange, with cast iron bearing seat insert. Mechanical bearing lock-shaft-end, for longer life. Reliable, field proven, corrosion resistant rotating switch. High overload capacities provided by service factor. Neoprene shaft flinger on J frame motors protects bearings by repelling moisture and other contaminants.

    Shaft Material:
    Keyed shafts are made of carbon steel. Threaded shafts are 416 stainless steel. Shafts are CW rotation, facing lead end.

    Bearings:
    203 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end. Shaft-end bearing is locked to limit axial movement of the shaft.

    Terminal Board:
    1/4" Quick connects (keyed shaft motors are reversible).

    U.L. and C.S.A. Recognized:
    Motor components (UL File No. E57948).
    Class "B" insulation system (UL File No. E55555).
    Thermal protector/winding combination (UL No. E57955) through 1 HP C.S.A. listed through 1 HP (Report No. LR33543).

  • Leeson Threaded Shaft Drip-Proof Single Phase Less Base Jet Pump Motors

    • Threaded Shaft
    • Drip-Proof
    • Single Phase
    • Less Base
    General Specifications:
    Stator impregnated with extra heavy varnish system. High temperature copper magnet wire provides extended motor life. "Super Hush" flow-through ventilation system (exhaust shaft-end) standard. Vertical or horizontal mounting (drip-cover available). Ground provision. Die cast aluminum NEMA 56 C face mounting flange, with cast iron bearing seat insert. Mechanical bearing lock-shaft-end, for longer life. Reliable, field proven, corrosion resistant rotating switch. High overload capacities provided by service factor. Neoprene shaft flinger on J frame motors protects bearings by repelling moisture and other contaminants.

    Shaft Material:
    Keyed shafts are made of carbon steel. Threaded shafts are 416 stainless steel. Shafts are CW rotation, facing lead end.

    Bearings:
    203 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end. Shaft-end bearing is locked to limit axial movement of the shaft.

    Terminal Board:
    1/4" Quick connects (keyed shaft motors are reversible).

    U.L. and C.S.A. Recognized:
    Motor components (UL File No. E57948).
    Class "B" insulation system (UL File No. E55555).
    Thermal protector/winding combination (UL No. E57955) through 1 HP C.S.A. listed through 1 HP (Report No. LR33543).

  • Leeson Threaded Shaft Drip-Proof Single Phase Less Base Jet Pump Motors

    • Threaded Shaft
    • TEFC
    • Single Phase
    • Less Base
    General Specifications:
    Stator impregnated with extra heavy varnish system. High temperature copper magnet wire provides extended motor life. "Super Hush" flow-through ventilation system (exhaust shaft-end) standard. Vertical or horizontal mounting (drip-cover available). Ground provision. Die cast aluminum NEMA 56 C face mounting flange, with cast iron bearing seat insert. Mechanical bearing lock-shaft-end, for longer life. Reliable, field proven, corrosion resistant rotating switch. High overload capacities provided by service factor. Neoprene shaft flinger on J frame motors protects bearings by repelling moisture and other contaminants.

    Shaft Material:
    Keyed shafts are made of carbon steel. Threaded shafts are 416 stainless steel. Shafts are CW rotation, facing lead end.

    Bearings:
    203 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end. Shaft-end bearing is locked to limit axial movement of the shaft.

    Terminal Board:
    1/4" Quick connects (keyed shaft motors are reversible).

    U.L. and C.S.A. Recognized:
    Motor components (UL File No. E57948).
    Class "B" insulation system (UL File No. E55555).
    Thermal protector/winding combination (UL No. E57955) through 1 HP C.S.A. listed through 1 HP (Report No. LR33543).

  • Leeson Threaded Shaft Drip-Proof Single Phase Less Base Jet Pump Motors

    • Threaded Shaft
    • TEFC
    • Single Phase
    • With Base
    General Specifications:
    Stator impregnated with extra heavy varnish system. High temperature copper magnet wire provides extended motor life. "Super Hush" flow-through ventilation system (exhaust shaft-end) standard. Vertical or horizontal mounting (drip-cover available). Ground provision. Die cast aluminum NEMA 56 C face mounting flange, with cast iron bearing seat insert. Mechanical bearing lock-shaft-end, for longer life. Reliable, field proven, corrosion resistant rotating switch. High overload capacities provided by service factor. Neoprene shaft flinger on J frame motors protects bearings by repelling moisture and other contaminants.

    Shaft Material:
    Keyed shafts are made of carbon steel. Threaded shafts are 416 stainless steel. Shafts are CW rotation, facing lead end.

    Bearings:
    203 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end. Shaft-end bearing is locked to limit axial movement of the shaft.

    Terminal Board:
    1/4" Quick connects (keyed shaft motors are reversible).

    U.L. and C.S.A. Recognized:
    Motor components (UL File No. E57948).
    Class "B" insulation system (UL File No. E55555).
    Thermal protector/winding combination (UL No. E57955) through 1 HP C.S.A. listed through 1 HP (Report No. LR33543).

  • Leeson Threaded Shaft Drip-Proof Single Phase Less Base Jet Pump Motors

    • Threaded Shaft
    • Explosion Proof
    • TEFC
    • Single Phase
    • C-Face Less Base
    General Specifications:
    Stator impregnated with extra heavy varnish system. High temperature copper magnet wire provides extended motor life. "Super Hush" flow-through ventilation system (exhaust shaft-end) standard. Vertical or horizontal mounting (drip-cover available). Ground provision. Die cast aluminum NEMA 56 C face mounting flange, with cast iron bearing seat insert. Mechanical bearing lock-shaft-end, for longer life. Reliable, field proven, corrosion resistant rotating switch. High overload capacities provided by service factor. Neoprene shaft flinger on J frame motors protects bearings by repelling moisture and other contaminants.

    Shaft Material:
    Keyed shafts are made of carbon steel. Threaded shafts are 416 stainless steel. Shafts are CW rotation, facing lead end.

    Bearings:
    203 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end. Shaft-end bearing is locked to limit axial movement of the shaft.

    Terminal Board:
    1/4" Quick connects (keyed shaft motors are reversible).

    U.L. and C.S.A. Recognized:
    Motor components (UL File No. E57948).
    Class "B" insulation system (UL File No. E55555).
    Thermal protector/winding combination (UL No. E57955) through 1 HP C.S.A. listed through 1 HP (Report No. LR33543).

  • Leeson Threaded Shaft Drip-Proof Three Phase Less Base Jet Pump Motors

    • Threaded Shaft
    • Drip-Proof
    • Three Phase
    • Less Base
    Jet Pump Motors
    General Specifications:
    Rugged, three phase jet pump motors for industrial service. NEMA 56 C face. Stator impregnated with heavy varnish system. High temperature copper magnet wire for high overload capacity. Grounding provision inside oversized gasketed conduit box. 380 alloy aluminum endplate with cast bearing seat insert. Neoprene shaft flinger to repel moisture and other contaminants. Mechanical bearing lock, shaft end, controls axial movement. UL and CSA recognized design (UL file No. E57948).
    Shaft Material:
    303 stainless steel, threaded.
    Bearings:
    203 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end. Shaft-end bearing is locked to limit axial movement of the shaft.
    Electrical Specifications:
    Explosion-proof motors have automatic overload protection. Others have no thermal overload protection.

  • Leeson Threaded Shaft Drip-Proof Three Phase Less Base Jet Pump Motors

    • Threaded Shaft
    • Drip-Proof
    • Three Phase
    • With Base
    Jet Pump Motors
    General Specifications:
    Rugged, three phase jet pump motors for industrial service. NEMA 56 C face. Stator impregnated with heavy varnish system. High temperature copper magnet wire for high overload capacity. Grounding provision inside oversized gasketed conduit box. 380 alloy aluminum endplate with cast bearing seat insert. Neoprene shaft flinger to repel moisture and other contaminants. Mechanical bearing lock, shaft end, controls axial movement. UL and CSA recognized design (UL file No. E57948).
    Shaft Material:
    303 stainless steel, threaded.
    Bearings:
    203 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end. Shaft-end bearing is locked to limit axial movement of the shaft.
    Electrical Specifications:
    Explosion-proof motors have automatic overload protection. Others have no thermal overload protection.

  • Leeson Threaded Shaft Drip-Proof Three Phase Less Base Jet Pump Motors

    • Threaded Shaft
    • TEFC
    • Three Phase
    • Less Base
    Jet Pump Motors
    General Specifications:
    Rugged, three phase jet pump motors for industrial service. NEMA 56 C face. Stator impregnated with heavy varnish system. High temperature copper magnet wire for high overload capacity. Grounding provision inside oversized gasketed conduit box. 380 alloy aluminum endplate with cast bearing seat insert. Neoprene shaft flinger to repel moisture and other contaminants. Mechanical bearing lock, shaft end, controls axial movement. UL and CSA recognized design (UL file No. E57948).
    Shaft Material:
    303 stainless steel, threaded.
    Bearings:
    203 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end. Shaft-end bearing is locked to limit axial movement of the shaft.
    Electrical Specifications:
    Explosion-proof motors have automatic overload protection. Others have no thermal overload protection.

  • Leeson Threaded Shaft TEFC Three Phase with Base Jet Pump Motors

    • Threaded Shaft
    • TEFC
    • Three Phase
    • With Base
    Jet Pump Motors
    General Specifications:
    Rugged, three phase jet pump motors for industrial service. NEMA 56 C face. Stator impregnated with heavy varnish system. High temperature copper magnet wire for high overload capacity. Grounding provision inside oversized gasketed conduit box. 380 alloy aluminum endplate with cast bearing seat insert. Neoprene shaft flinger to repel moisture and other contaminants. Mechanical bearing lock, shaft end, controls axial movement. UL and CSA recognized design (UL file No. E57948).
    Shaft Material:
    303 stainless steel, threaded.
    Bearings:
    203 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end. Shaft-end bearing is locked to limit axial movement of the shaft.
    Electrical Specifications:
    Explosion-proof motors have automatic overload protection. Others have no thermal overload protection.

  • Leeson Threaded Shaft Three Phase TEFC C-Face Less Base Washguard Jet Pump Motors

    • Threaded Shaft
    • Explosion Proof
    • TEFC/TENV
    • Three Phase
    • C-Face Less Base
    Jet Pump Motors
    General Specifications:
    Rugged, three phase jet pump motors for industrial service. NEMA 56 C face. Stator impregnated with heavy varnish system. High temperature copper magnet wire for high overload capacity. Grounding provision inside oversized gasketed conduit box. 380 alloy aluminum endplate with cast bearing seat insert. Neoprene shaft flinger to repel moisture and other contaminants. Mechanical bearing lock, shaft end, controls axial movement. UL and CSA recognized design (UL file No. E57948).
    Shaft Material:
    303 stainless steel, threaded.
    Bearings:
    203 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end. Shaft-end bearing is locked to limit axial movement of the shaft.
    Electrical Specifications:
    Explosion-proof motors have automatic overload protection. Others have no thermal overload protection.

  • Leeson Threaded Shaft Three Phase TEFC C-Face Less Base Washguard Jet Pump Motors

    • Washguard
    • Jet Pump
    • Threaded Shaft
    • Three Phase
    • TEFC
    • C-Face less Base
    Washdown duty three phase jet pump motors for industrial service. These motors include all of the features of LEESON’s White Duck WASHGUARD motors with the addition of a 56J threaded shaft for use on jet pumps. For demanding pump applications in wet, humid, or washdown environments.

  • Leeson Threaded Shaft Three Phase TEFC C-face with Base Washguard Jet Pump Motors

    • Washguard
    • Jet Pump
    • Threaded Shaft
    • Three Phase
    • TEFC
    • C-face with Base
    Washdown duty three phase jet pump motors for industrial service. These motors include all of the features of LEESON’s White Duck WASHGUARD motors with the addition of a 56J threaded shaft for use on jet pumps. For demanding pump applications in wet, humid, or washdown environments.

  • Leeson Keyed Shaft Aluminum C Face Less Base Single Phase Drip-Proof Swimming Pool Pump Motors

    • Keyed Shaft
    • Aluminum C Face Less Base
    • Single Phase
    • Drip-Proof
    Commercial Duty Swimming Pool Motors
    General Specifications:
    Cast iron NEMA 56 C face mounting face or aluminum as noted. Mechanical bearing lock-shaft-end. Fully enclosed endbell at switch-end. Protected "double contact" starting switch with dual contact switch circuit providing maximum starting dependability. Reliable, field proven, corrosion resistant rotating switch. Stator impregnated with extra heavy varnish system. High temperature copper magnet wire providing extended motor life. "Low voltage" run capabilities. "Super Hush" flow-through ventilation system (exhaust shaft-end). Gaskets supplied under conduit cover and capacitor case giving added environmental protection. 1/2" NPT pipe tap supplied in "built-in" conduit box. Grounding provisions inside terminal panel plus external provision. High overload capacities provided by service factor.
    Shaft Material:
    Keyed shafts are made of carbon steel. Threaded shafts are 303 stainless steel. Shafts are CW rotation, facing lead end.
    Bearings:
    304 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end.
    Terminal Boards:
    1/4" quick connects (keyed shaft motors are reversible).
    U.L. and C.S.A. Recognized:
    Motor components (UL File No. #57948).
    Class "B" insulation system (UL File No. E55555).
    Thermal protector/winding combination (UL No. E56955) through 1 HP. C.S.A. listed through 1 HP (Report No. LR33543).

  • Leeson Keyed Shaft Aluminum C Face Less Base Single Phase Drip-Proof Swimming Pool Pump Motors

    • Keyed Shaft
    • Cast Iron C Face Less Base
    • Single Phase
    • Drip-proof
    Commercial Duty Swimming Pool Motors
    General Specifications:
    Cast iron NEMA 56 C face mounting face or aluminum as noted. Mechanical bearing lock-shaft-end. Fully enclosed endbell at switch-end. Protected "double contact" starting switch with dual contact switch circuit providing maximum starting dependability. Reliable, field proven, corrosion resistant rotating switch. Stator impregnated with extra heavy varnish system. High temperature copper magnet wire providing extended motor life. "Low voltage" run capabilities. "Super Hush" flow-through ventilation system (exhaust shaft-end). Gaskets supplied under conduit cover and capacitor case giving added environmental protection. 1/2" NPT pipe tap supplied in "built-in" conduit box. Grounding provisions inside terminal panel plus external provision. High overload capacities provided by service factor.
    Shaft Material:
    Keyed shafts are made of carbon steel. Threaded shafts are 303 stainless steel. Shafts are CW rotation, facing lead end.
    Bearings:
    304 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end.
    Terminal Boards:
    1/4" quick connects (keyed shaft motors are reversible).
    U.L. and C.S.A. Recognized:
    Motor components (UL File No. #57948).
    Class "B" insulation system (UL File No. E55555).
    Thermal protector/winding combination (UL No. E56955) through 1 HP. C.S.A. listed through 1 HP (Report No. LR33543).

  • Leeson Keyed Shaft Aluminum C Face Less Base Single Phase Drip-Proof Swimming Pool Pump Motors

    • Threaded Shaft
    • Aluminum C Face Less Base
    • Single Phase
    • Drip-Proof
    Commercial Duty Swimming Pool Motors
    General Specifications:
    Cast iron NEMA 56 C face mounting face or aluminum as noted. Mechanical bearing lock-shaft-end. Fully enclosed endbell at switch-end. Protected "double contact" starting switch with dual contact switch circuit providing maximum starting dependability. Reliable, field proven, corrosion resistant rotating switch. Stator impregnated with extra heavy varnish system. High temperature copper magnet wire providing extended motor life. "Low voltage" run capabilities. "Super Hush" flow-through ventilation system (exhaust shaft-end). Gaskets supplied under conduit cover and capacitor case giving added environmental protection. 1/2" NPT pipe tap supplied in "built-in" conduit box. Grounding provisions inside terminal panel plus external provision. High overload capacities provided by service factor.
    Shaft Material:
    Keyed shafts are made of carbon steel. Threaded shafts are 303 stainless steel. Shafts are CW rotation, facing lead end.
    Bearings:
    304 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end.
    Terminal Boards:
    1/4" quick connects (keyed shaft motors are reversible).
    U.L. and C.S.A. Recognized:
    Motor components (UL File No. #57948).
    Class "B" insulation system (UL File No. E55555).
    Thermal protector/winding combination (UL No. E56955) through 1 HP. C.S.A. listed through 1 HP (Report No. LR33543).

  • Leeson Keyed Shaft Aluminum C Face Less Base Single Phase Drip-Proof Swimming Pool Pump Motors

    • Threaded Shaft
    • Cast Iron C Face Less Base
    • Single Phase
    • Drip-Proof
    Commercial Duty Swimming Pool Motors
    General Specifications:
    Cast iron NEMA 56 C face mounting face or aluminum as noted. Mechanical bearing lock-shaft-end. Fully enclosed endbell at switch-end. Protected "double contact" starting switch with dual contact switch circuit providing maximum starting dependability. Reliable, field proven, corrosion resistant rotating switch. Stator impregnated with extra heavy varnish system. High temperature copper magnet wire providing extended motor life. "Low voltage" run capabilities. "Super Hush" flow-through ventilation system (exhaust shaft-end). Gaskets supplied under conduit cover and capacitor case giving added environmental protection. 1/2" NPT pipe tap supplied in "built-in" conduit box. Grounding provisions inside terminal panel plus external provision. High overload capacities provided by service factor.
    Shaft Material:
    Keyed shafts are made of carbon steel. Threaded shafts are 303 stainless steel. Shafts are CW rotation, facing lead end.
    Bearings:
    304 Double-sealed ball bearing, shaft-end; 203 Double-shielded ball bearing, switch-end.
    Terminal Boards:
    1/4" quick connects (keyed shaft motors are reversible).
    U.L. and C.S.A. Recognized:
    Motor components (UL File No. #57948).
    Class "B" insulation system (UL File No. E55555).
    Thermal protector/winding combination (UL No. E56955) through 1 HP. C.S.A. listed through 1 HP (Report No. LR33543).

  • Leeson Keyed Shaft C Face Less Base Single Phase PSC Drip-Proof Pool and Jet Pump Motor

    • Keyed Shaft
    • C Face Less Base
    • Single Phase
    • PSC
    • Drip-Proof
    Performa FHP Pool and Jet Pump Motors
    General Specifications:
    Energy-saving single-phase Permanent Split Capacitor PERFORMA+ Pool and Jet Pump motors have separate compartment design required for many pool and spa applications. PSC design gives energy-efficient operation with no switches to wear or seize. Special balancing of FHP motors gives super quiet operation. Motors are connected for CW rotation, viewed from the lead end of the motor, and are not reversible. All designs - keyed and threaded - have 304 stainless steel shafts. Double-sealed bearings on both ends of the motor have high temperature grease for long life. Motors have external grounding lug and Class F insulation with Class B rise.

    Standards and Approvals:
    UL component recognized, UL file number E57948
    CSA certified for safety, CSA report number LR33543
    Design complies with requirements for motor/pump/cord assembles that must pass the UL 1081 water spray test.

  • Leeson Threaded Shaft C Face Less Base Single Phase PSC Drip-proof Pool and Jet Pump Motor

    • Threaded Shaft
    • C Face Less Base
    • Single Phase
    • PSC
    • Drip-proof
    Performa FHP Pool and Jet Pump Motors
    General Specifications:
    Energy-saving single-phase Permanent Split Capacitor PERFORMA+ Pool and Jet Pump motors have separate compartment design required for many pool and spa applications. PSC design gives energy-efficient operation with no switches to wear or seize. Special balancing of FHP motors gives super quiet operation. Motors are connected for CW rotation, viewed from the lead end of the motor, and are not reversible. All designs - keyed and threaded - have 304 stainless steel shafts. Double-sealed bearings on both ends of the motor have high temperature grease for long life. Motors have external grounding lug and Class F insulation with Class B rise.

    Standards and Approvals:
    UL component recognized, UL file number E57948
    CSA certified for safety, CSA report number LR33543
    Design complies with requirements for motor/pump/cord assembles that must pass the UL 1081 water spray test.

  • Leeson Threaded Shaft Square Flange Less Base Single Phase PSC Drip-proof Pool and Jet Pump Motor

    • Threaded Shaft
    • Square Flange Less Base
    • Single Phase
    • PSC
    • Drip-proof
    Performa FHP Pool and Jet Pump Motors
    General Specifications:
    Energy-saving single-phase Permanent Split Capacitor PERFORMA+ Pool and Jet Pump motors have separate compartment design required for many pool and spa applications. PSC design gives energy-efficient operation with no switches to wear or seize. Special balancing of FHP motors gives super quiet operation. Motors are connected for CW rotation, viewed from the lead end of the motor, and are not reversible. All designs - keyed and threaded - have 304 stainless steel shafts. Double-sealed bearings on both ends of the motor have high temperature grease for long life. Motors have external grounding lug and Class F insulation with Class B rise.

    Standards and Approvals:
    UL component recognized, UL file number E57948
    CSA certified for safety, CSA report number LR33543
    Design complies with requirements for motor/pump/cord assembles that must pass the UL 1081 water spray test.

  • Leeson Single Phase Drip-Proof Rigid Base JP Pump Motors

    • Single Phase
    • Drip-Proof
    • Rigid Base
    General Specifications:
    For use with close-coupled pumps having NEMA JP mounting and shaft dimensions. In such applications, the pump impeller is mounted directly on the motor shaft. Designed for continuous duty service. All motors listed are 1.15 Service Factor.

  • Leeson Three Phase Drip-Proof Rigid Base JP Pump Motors

    • Three Phase
    • Drip-Proof
    • Rigid Base
    General Specifications:
    For use with close-coupled pumps having NEMA JP mounting and shaft dimensions. In such applications, the pump impeller is mounted directly on the motor shaft. Designed for continuous duty service. All motors listed are 1.15 Service Factor.

  • Leeson Single Phase Drip-Proof Rigid Base JM Pump Motors

    • Single Phase
    • Drip-Proof
    • Rigid Base
    JM Pump Motors
    General Specifications:
    Designed for continuous duty service on close-coupled pumps using NEMA JM mounting provisions. All motors have a rigid mounting base and NEMA JM pump shaft.

  • Leeson Three Phase Drip-Proof Rigid Base JM Pump Motors

    • Three Phase
    • Drip-Proof
    • Rigid Base
    JM Pump Motors
    General Specifications:
    Designed for continuous duty service on close-coupled pumps using NEMA JM mounting provisions. All motors have a rigid mounting base and NEMA JM pump shaft.

  • Leeson Three Phase TEFC Rigid Base JM Pump Motors

    • Three Phase
    • TEFC
    • Rigid Base
    JM Pump Motors
    General Specifications:
    Designed for continuous duty service on close-coupled pumps using NEMA JM mounting provisions. All motors have a rigid mounting base and NEMA JM pump shaft.

  • Leeson Three Phase TEFC Washguard JM Pump Motors

    • Three Phase
    • TEFC
    • JM Pump
    JM Pump Motors
    General Specifications:
    Designed for continuous duty service on close-coupled pumps using NEMA JM mounting provisions. All motors have a rigid mounting base and NEMA JM pump shaft.

  • Lincoln Submersible Hydraulic Elevator Pump Motors

    • 3-Phase
    • Totally Open Frame Construction Foot Mounted in 160ZBS Frame Size
    Applications:
    These motors are designed to meet the demands in the Hydraulic Elevator Pump Industry. Our Submersible Hydraulic pump elevator motors are ready to be placed in elevator systems for applications in hydraulic pump passenger, service, freight and low-rise elevators. Rated up to 6 floors at speeds up to 200 fpm.

  • Lincoln Hydraulic Elevator Pump Motors

    • Open Drip-Proof Construction
    • 3-Phase
    • Foot Mounted
    • 10 to 100 HP
    Applications:
    Hydraulic pump passenger, service, freight, and dumbwaiter low rise elevators. Typically hydraulic elevators travel up to 6 floors at speeds up to 200 fpm.