• Leeson Single Phase Totally Enclosed Fan Cooled (TEFC) Motors

    • Rigid Base
    • Capacitor Start
    • General Purpose

  • Leeson Three Phase Totally Enclosed Fan Cooled (TEFC) Motors
  • Leeson Cast Iron Three Phase Totally Enclosed Fan Cooled (TEFC) Motors

    • 150 & 170 Series
    • Rigid Base
    • General Purpose
    For reliable performance in heavy-duty industrial applications, nothing beats the LEESON Heavyweights. With their cast iron construction and 1.15 Service Factor, they are ideal for "tough to handle" applications.
    But that's only part of the story. LEESON 150 and 170-series cast iron motors are extremely versatile and can be field converted in minutes to a number of different configurations, including:
  • Severe Duty TEFC (using cast iron fan guard kit)
  • F2 mounting (by reassembly)
  • C face with rigid base (from stock or using C face kit)
  • D flange with base (using D flange kit)
    CSA certified under report number LR62104
    CSA Energy Efficiency Verification report number EEV78720-1
    UL recognized insulation system, file number E55555 and UL recognized construction, file number E57948 on all cast iron motors produced in June 2003 and later.

    LEESON’s Inverter Rated Insulation System (IRIS™) provides superior motor protection against voltage spikes induced by variable frequency drives. This total insulation system protects better than spike-resistant magnet wire alone. Specially formed phase insulation, cushioned and sleeved connections (from the leads all the way into the turns), and deep-penetrating, non-hygroscopic, high temperature varnish are just a few features contributing to the extra protection. All this plus second generation, spike-resistant magnet wire. The IRIS™ total insulation system is standard at no extra cost in all LEESON stock NEMA three-phase motors, 1 HP and larger.

    Note 150 and 170 Series Drip-Proof and TEFC motors in NEMA frames 180T thru 447T can be field converted, by reassembly, to F2 conduit box locations.

  • Leeson Single Phase C Face less Base TEFC Motors

    • Capacitor Start
    • General Purpose
    • TEFC
    • C Face Less Base
    • Single Phase

  • Leeson Single Phase C Face with Base TEFC Motors

    • Capacitor Start
    • General Purpose
    • TEFC
    • C Face with Base
    • Single Phase

  • Leeson Three Phase C Face Less Base TEFC Motors

    • General Purpose
    • TEFC
    • C Face Less Base
    • Three Phase

  • Leeson Three Phase C Face with Base TEFC Motors

    • General Purpose
    • TEFC
    • C Face With Base
    • Three Phase

  • Leeson TEFC Single Phase Resilient Base Motors

    • TEFC
    • Single Phase Resilient Base

      Totally enclosed, fan cooled design makes these motors ideal for replacement in tough agricultural and industrial applications where contaminants cause failure of open drip-proof motors.

      Resilient Base Motors Single Phase
      General Purpose or Fan & dService Moderate Starting Torque
      General Specifications:
      Industrial quality, resilient (cradle) mounted, capacitor start-type, ball bearing motors for fan and blower service. Moderate starting torque electrical design to reduce stress on fan blades during start-up. Capacitor-type design has higher energy efficiency rating than split phase, single phase fan and blower motors. Suitable for belt-driven fans or fan-on-shaft applications. Self-ventilated design, may be mounted outside of the fan’s airflow.

  • Leeson TEFC Three Phase Resilient Base Motors

    • TEFC
    • Three Phase Resilient Base

      Totally enclosed, fan cooled design makes these motors ideal for replacement in tough industrial applications where contaminants cause failure of open drip-proof designs.

      Resilient Base Motors Three Phase
      General Purpose or Fan & Blower Service Moderate Starting Torque
      General Specifications:
      Industrial quality, resilient (cradle) mounted, three phase, ball bearing motors for fan and blower service. Moderate starting torque electrical design to reduce stress on fan blades during startup. Suitable for belt-driven fans or fan-on-shaft applications. Self-ventilated design, may be mounted outside of the fan’s airflow.

  • Leeson Rigid Base Single Phase TEFC Instant Reversing Motors
  • Leeson C Face with Base Single Phase TEFC Pressure Washer Motors

    • Rigid Base
    • Single Phase
    • TEFC
    Pressure Washer Pump Motors Low Amperage Design
    Motors specially suited for hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. Capacitor start, capacitor run construction for reduced amperage.

  • Leeson Three Phase Drip-Proof Rigid Base Compressor Duty Motors

    • Three Phase
    • TEFC
    • Rigid Base
    • EPACT motors.

      General Specifications:
      Motors designed for air compressor, pump, and fan and blower duty applications which require high breakdown torque and rugged mechanical construction.

  • Leeson Single Phase TEFC Rigid Base Woodworking Motors

    • Single Phase
    • TEFC
    • Rigid Base

      General Specifications:
      Motors designed for woodworking equipment such as table saws, planers, etc.
      Totally enclosed designs prevent motor problems caused by wood dust and shavings.

  • Leeson Single Phase TEFC C Face Less BaseTable Saw Motor

    • Single Phase
    • TEFC
    • C Face less Base
    General Specifications:
    Totally enclosed fan cooled motor produces extra high breakdown torques for maximum cutting power.
    Supplied with 8-foot cord and 115 V plug, on/off toggle switch. CW rotation, facing lead end. Replaces Delta motor number 62-042.

  • Leeson Single Phase TEFC C Face Less BaseTable Saw Motor

    • Single Phase
    • TEFC
    • Rigid Base
    General Specifications:
    Totally enclosed fan cooled motor produces extra high breakdown torques for maximum cutting power.
    Supplied with 8-foot cord and 115 V plug, on/off toggle switch. CW rotation, facing lead end. Replaces Delta motor number 62-042.

  • Leeson Single Phase TEFC Delta Unisaw® Mounting Contractors' Saw Motors

    • Single Phase
    • TEFC
    • Delta Unisaw® Mounting

      Special Mounting:
      Motor pivots on rod for belt tensioning. Totally enclosed fan cooled motor produces extra high breakdown torques for maximum cutting power. Has 1 3/4" long shaft, 3/4" diameter with keyway. Added 54" cord to all motors 1 1/2-4 HP. Catalog numbers 120925 and 120997 replace Delta UNISAW® motor 83-621 (1 1/2 HP); 120728 and 120998 replace Delta UNISAW® motor 83-651 (3 HP).

  • Vertical Motors

    Applications:
    For use on turbine, mix flow and propeller pumps.