Item # 6KDV32350Q2B70, DV-300™ DC Drives On Koffler Electrical Mechanical Apparatus Repair, Inc.

Koffler Electrical Apparatus Repair & Electric Motor Sales

EASA Logo

ISES Logo

IEEE Logo

		\| Shipping \| Tax \| Terms

Request for Quote	0 Items


All Categories > Products > Variable Frequency Drives > DV-300™ DC Drives > DV-300™ DC Drives > Item # 6KDV32350Q2B70

larger image

Item # 6KDV32350Q2B70, DV-300™ DC Drives
List Price $38,269.00

1250/700 HP, 460/230 V

The DV-300 is a 3-phase, six-pulse converter which is available in either non-regenerative or fully regenerative design. The DV-300 drive controller allows for precise regulation of motor speed, current, and field (field weakening and field economy are standard). This performance and chassis packaging allows the DV-300 to be applied easily in a wide array of industries including textiles, paper converting, plastics converting, corrugating, wire drawing, rubber and plastics, metal processing, machine tools, material handling, and more.

To allow for easy start-up, the DV-300 offers two choices: an optional keypad programmer or the standard GE toolbox. The Windows®-based GE toolbox enables the user to set parameters and program converter I/O and self-tune the regulators. Archiving the drive setup allows the user to have preconfigured setups available for similar applications. These are easily maintained and save valuable time.

The DV-300 drive can handle difficult applications and complex operations with the addition of the digital general function (DGF) card. The DGF card is an optional Intel® microprocessor-based board which allows application specific regulators, provides special sequencing operations, and solves other drive control challenges.

A wide range of advanced communication capabilities are available for the DV-300 drive. The drive communicates on a high-speed serial link including the following protocol options: DeviceNet™, Profibus-DP, Interbus-S, and Genius®. These communication options allow the drive, system control, and the data collection system to be easily integrated. Other options for the DV-300 include additional I/O, removable keypad programmer, and keypad door-mount kit.

Specifications · Programmable · Protective Functions · Standard I/O · Environmental Operating Conditions · AC Input · Performance · Electrical Standards and Codes · Options

Specifications

HP and Voltage		1250 hp, 460 V 700 hp, 230 V

Output DC (Nominal Current)		2350

Number of Quadrants		2 quadrants (Non-Regenerative/Non-Reversing)

Voltage Rating		500/max Vac for Q4

Rated Field Current		70 A

Accessories		6KCV300CTI, RS 485/232 Converter ($170.00) 6KCV300DCN, DeviceNet Option Card (DGF Card Required) ($240.00) 6KCV300DGF, Digital General Function Card ($1,230.00) 6KCV300DVN, SBI DeviceNet Option Card (without DGF) ($745.00) 6KCV300INS, Interbus-S Bus Communication Option Card ($805.00) 6KCV300KPM, External Keypad Mounting Kit ($75.00) 6KCV300KPU, AV/DV-300 Keypad Programmer ($290.00) 6KCV300PDP, Profibus-DP Bus Communication Option Card ($745.00) 6KCV300TBO, I/O Expansion Option Card (Discrete and Analog) ($230.00) 6KCV300WPD, Win+Drive ($5,000.00) 6KDV300DES, Digital Encoder to Sinusoidal Converter (DIN rail mount) ($220.00) HE300GEN200, Genius Communication Option Card ($1,450.00)

Notes		Please contact customer service for latest revision. Non-Stock: Includes drive controller and external bridge. Please contact factory for more information.

Programmable

Four Accel/Decel Ramps		Each independently adjustable from 0-65,000 s

Ramp Types: Linear, S-Curve		S-curve shape is adjustable through special time constant parameters

Min./Max. Speed Limits		With independent adjustments for forward and reverse speeds

Adjustable Current Limits (Motoring and Braking)		150 % for 60 s standard

Seven Preset Speeds		Selectable through three contact closures

Password Protection		5-digit combination, selectable by user

Field Control		Current regulation Disable (for external field supply) Field economy Field weakening voltage regulation

Jog Functions		Reference from internal parameter or external reference potentiometer Can be programmed with or without linear time

Zero Speed Functionality		Includes zero speed level, zero speed threshold, and delay detection

Tach Feedback Bypass		Drive automatically switches to armature voltage feedback if the tach signal is lost

Catch-a-Spinning Motor (Auto Capture)		Allows restart of drive with a rotating motor

Reset to Default Parameters		Aids in start-up and troubleshooting

Protective Functions

Faults Detected		Communication card failure Enable sequence error Fault data history (last ten faults) Field loss Heatsink over temperature Motor over temperature Motor overload Option card failure Overcurrent Over voltage/under voltage Tach loss User's external faults

Standard I/O

Analog Inputs		Three differential, 12 bit Programmable and selectable for ± 10 Vdc, 0-20 mA; 0-10 Vdc, 4-20 mA

Digital Inputs		Four fixed 24 Vdc (enable, start/stop, fast stop, external fault)

Digital Outputs		One drive OK normally open contact One programmable normally open contact

Built-in RS 485 Communication Port		Allows communication with drive for setup and troubleshooting

Sinusoidal Encoder Input (with Internal 5 Vdc Available from Drive)		Provides the best speed regulation

Digital Tach (with Internal 24 Vdc Available from Drive)		Utilizes standard digital tachometer for speed regulation

DC Tach Input		Utilizes analog dc tachometers for speed regulation

Environmental Operating Conditions

Ambient Temperature		0 to 40 ºC

Ambient Humidity		5 to 85 % RH (non-condensing)

Altitude		To 3300 ft (1000 m) without derating

Enclosure		IP20 - Open chassis

AC Input

Armature		230-500 Vac ± 10 %, 3-phase

Control Power		115-230 Vac ± 10 %, 1-phase

Field		230-460 Vac ± 10 %, 1-phase

Performance

Features		Regenerative and Non-Regenerative 150 % Overload for 60 S Speed, Current, and CEMF Regulation 16 Bit Microprocessor

Speed Regulation		CEMF = 1 - 2 % DC tach = up to 0.1 % Digital encoder = 0.02 % Sinusoidal enc. = 0.01 %

Electrical Standards and Codes

Agency Approvals		CE, cUL

IEC		Low voltage directive #EN50178

Options

Options		2-line backlit, detachable, and removable keypad programmer Communications: DeviceNet, Profibus-DP, Interbus-S, and Genius DGF 386 (digital general function card) Remote keypad mounting kit

TBO Digital or Analog Eexpansion Modules (Maximum of two) per TBO Board		Four 24 Vdc digital inputs Four 24 Vdc digital outputs Two +10 Vdc analog outputs

Item # 6KDV32350Q2B70, DV-300™ DC Drives

HP and Voltage

Output DC (Nominal Current)

Number of Quadrants

Voltage Rating

Rated Field Current

Accessories

Notes

Four Accel/Decel Ramps

Ramp Types: Linear, S-Curve

Min./Max. Speed Limits

Adjustable Current Limits (Motoring and Braking)

Seven Preset Speeds

Password Protection

Field Control

Jog Functions

Zero Speed Functionality

Tach Feedback Bypass

Catch-a-Spinning Motor (Auto Capture)

Reset to Default Parameters

Faults Detected

Analog Inputs

Digital Inputs

Digital Outputs

Built-in RS 485 Communication Port

Sinusoidal Encoder Input (with Internal 5 Vdc Available from Drive)

Digital Tach (with Internal 24 Vdc Available from Drive)

DC Tach Input

Ambient Temperature

Ambient Humidity

Altitude

Enclosure

Armature

Control Power

Field

Features

Speed Regulation

Agency Approvals

IEC

Options

TBO Digital or Analog Eexpansion Modules (Maximum of two) per TBO Board