Koffler Electrical Apparatus Repair & Electric Motor Sales

 

Search All Motors:
GO
Use a (*) to broaden your search results

View Koffler Electrical Videos

EASA Logo

ISES Logo

IEEE Logo

 
View RFQs  | Shipping 
 | Tax 
 | Terms
 Request for Quote 0 Items
All Categories > Products > AC Motors > Explosion-Proof Motors > Leeson Three Phase C Face Less Base Explosion-Proof Motors > Item # 158003  
Request Quote

Item # 158003, Leeson Three Phase C Face Less Base Explosion-Proof Motors

3 HP, 1740 RPM, NEMA Frame 182TC, 230/460 V,
  • Three Phase
  • C Face less Base
  • Division I, Division II, Class I, Groups C & D-Class II, Groups F & G With Conduit Box

    Explosion-Proof For Hazardous Locations
    Underwriters Laboratories and Canadian Standards Association Listed
    General Specifications:
    These explosion-proof motors are designed and approved for application in hazardous environments having certain explosive gases or materials present.

    Application Notes:
    These motors must be applied in accordance with the National Electrical Code, Article #500. A partial listing of explosive agents is noted below. Consult NFPA Publication 497M for a complete listing. Please note subheads above each column for qualifications of LEESON motors.




Specifications  · Technical Details  · Features

Specifications

Base
C Face Less Base

Enclosure Type
Totally Enclosed Fan Cooled

Phase
Three

HP
3

RPM 60 Hz
1740

Voltage
230 V
460 V

Overload Protection
Tstat

FL Amps 230 V
8.8

% FL Eff.
80.0

NEMA Frame
182TC

Disc. Sym.
C

C Dimension
15.62 in

Approx. Weight
91 lbs

NEMA Service Factor
1.00

Frame Construction
Cast Iron

Manufacturer


Technical Details
    No LEESON motors are listed for Class I, Group A or B.
    Class I
    Group A: Acetylene
    Group B: Butadiene, ethylene oxide, hydrogen, propylene oxide, manufactured gases containing more than 30% hydrogen by volume.
    Group C: Acetaldehyde, cyclopropane, diethyl ether, ethylene.
    Group D: Acetone, acrylonitrile, ammonia, benzene, butane, ethanol, ethylene dichloride, gasoline, hexane, isoprene, methane (natural gas), methanol, naphtha, propane, propylene, styrene, toluene, vinyl acetate, vinyl chloride, xylene.

    Class II
    Group E: Aluminum, magnesium and other metal dusts with similar characteristics.
    Group F: Carbon black, coke or coal dust.
    Group G: Flour, starch or grain dust.


Features
  • Explosion-proof motors are Class I, Group D-Class II, Groups F & G.
  • Rugged mechanical construction meeting all requirements for safety. UL and CSA listed.
  • Double shielded, pre-lubricated ball bearings are standard.
  • All motors have inherent automatic overload protection.
  • NEMA 1.0 Service Factor except as noted.
  • Explosion-proof conduit box included at no extra cost.
  • Normally-closed thermostats are standard on cast iron motors.
  • Division I areas are environments where a hazard is present continuously or would be subject to fire or explosion if the hazard was present as a result of an accident or uncommon occurrence.
  • Division II areas are environments where the threat of fire or explosion is not normally present and not likely to result in the event of an abnormal occurrence.


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Request Quote

 

Koffler Electrical  |  527 Whitney Street  |  San Leandro, CA 94577  |  Tel: (510) 567-0630  |  Fax: (510) 567-0636  |  Email: info@koffler.com  |  Privacy Policy  |  Site Map