25 HP, 1750 RPM, NEMA Frame 284TC, 230/460 V,
  • Three Phase
  • C Face with Base
  • Division I, Division II, Class I, Groups C & D-Class II Groups F & G with Conduit Box
  • EPACT motors

    Explosion-proof For Hazardous Locations
    Underwriters Laboratories and Canadian Standards Association Listed
    General Specifications:
    These explosion-proof motors are designed and approved for application in hazardous environments having certain explosive gases or materials present.

    Application Notes:
    These motors must be applied in accordance with the National Electrical Code, Article #500. A partial listing of explosive agents is noted below. Consult NFPA Publication 497M for a complete listing. Please note subheads above each column for qualifications of LEESON motors.
Unit of Measure

Specifications

Base

N/A C Face with Rigid Base

Phase

N/A Three

HP

N/A 25

RPM 60 Hz

N/A 1750

Voltage

N/A 230 V460 V

FL Amps 460 V

N/A 31.5

% FL Eff.

N/A 92.4

NEMA Frame

N/A 284TC

Disc. Sym.

N/A C

C Dimension

N/A 26.30 in

Approx. Weight

N/A 366 lbs

Frame Construction

N/A Cast Iron

Manufacturer

N/A
Leeson

Technical Details

N/A

    No LEESON motors are listed for Class I, Group A or B.
    Class I
    Group A: Acetylene
    Group B: Butadiene, ethylene oxide, hydrogen, propylene oxide, manufactured gases containing more than 30% hydrogen by volume.
    Group C: Acetaldehyde, cyclopropane, diethyl ether, ethylene.
    Group D: Acetone, acrylonitrile, ammonia, benzene, butane, ethanol, ethylene dichloride, gasoline, hexane, isoprene, methane (natural gas), methanol, naphtha, propane, propylene, styrene, toluene, vinyl acetate, vinyl chloride, xylene.

    Class II
    Group E: Aluminum, magnesium and other metal dusts with similar characteristics.
    Group F: Carbon black, coke or coal dust.
    Group G: Flour, starch or grain dust.