Koffler Electrical Mechanical Apparatus Repair, Inc
527 Whitney St
San Leandro, CA 94577 USA
Phone: 510-567-0630
Fax: 510-567-0636
Email: info@koffler.com
Website: http://www.koffler.com
All Categories > Products > Variable Frequency Drives > AF-60 LP Micro Drives > AF-60 LP Micro Drives - 230 Vac, 3-Phase, 50/60 Hz Input - (1/3 to 5 HP) > Item # 6KLP23001X9A1  


Item # 6KLP23001X9A1, AF-60 LP Micro Drives - 230 Vac, 3-Phase, 50/60 Hz Input - (1/3 to 5 HP)
List Price $320.00

1 HP, 230 V

230 Vac, 3-Phase Output





Specifications  · Environmental Conditions  · Standards  · Input Power Supply  · Output  · Control  · Logic Controller (LC)  · Process Controller (PI)  · Indication

Specifications

Voltage (AC)
230 V

Phase
Three

Input Frequency
50/60 Hz

HP
1

kW
0.75

Amps
4.2

Efficiency1
96.3

Watt Loss2
39.5

Height
6.13 in

Width
2.76 in

Depth
6.06 in

NEMA 1 Kit
NEMA1LP1

Din Rail Mounting Kit
RMACLP1

Unit Size
M1

Weight
2.43 lbs

Accessories
DEPLTACLP1, De-Coupling Plate Kit for 2 HP at 230 V/3 HP at 460 V and Below Drives ($15.00)
DEPLTACLP2, De-Coupling Plate Kit for 3 HP at 230 V/5 HP at 460 V and Below Drives ($15.00)
DEPLTACLP3, De-Coupling Plate Kit for 15 HP at 460 V and Above Drives ($20.00)
KYPDACLP1, Replacement AF-60 LP Keypad with Potentiometer ($60.00)
NEMA1ACLP1, NEMA 1 Kit for 1 HP and Below Drives ($30.00)
NEMA1ACLP2, NEMA 1 Kit for 2 HP at 230 V/3 HP at 460 V and Below Drives ($35.00)
NEMA1ACLP3, NEMA 1 Kit for 3 HP at 230V/5 HP at 460 V and Below Drives ($40.00)
NEMA1ACLP4, NEMA 1 Kit for 15 HP and 20 HP at 460 V Drives ($45.00)
NEMA1ACLP5, NEMA 1 Kit for 25 HP and 30 HP at 460 V Drives ($50.00)
RMACLP1, DIN Rail Mounting Kit for 1 HP and Below Drives ($20.00)
RMKYPDACLP1, Remote Mounting Kit for Keypad ($25.00)

Factory Installed Keypad
Keypad

Enclosure Type
IP20/Open

Revision
1st Revision
1 At rated load conditions
2 At rated load conditions


Environmental Conditions

Enclosure
IP20 (NEMA 1 with optional NEMA 1 kit)

Installation Location
Do not install in locations where product could be exposed to dust, corrosive gas, inflammable gas, oil mist, vapor, water drops or direct sunlight. There must be no salt in the atmosphere. Condensation must not be caused by sudden changes in temperature. For use at altitudes of 3280 ft. (1000 M) or less without derating.

Ambient Temperature
-10 to +50 ºC

Ambient Humidity
5 to 95 % RH (non-condensing)

Vibration
1.0 g

Storage Temperature
-25 to 65 ºC


Standards

Approvals
CE, UL, cUL, and C-Tick
Suitable for use on a circuit capable of delivering not more than 100,000 rms symmetrical amperes for 230 V and 460 V.
WEEE and RoHS Compliant


Input Power Supply

Rated Input AC Voltage
200-240 Vac, 1-phase, 50-60 Hz, ± 10 % V
200-240 Vac, 3-phase, 50-60 Hz, ± 10 % V
380-480 Vac, 3-phase, 50-60 Hz, ± 10 % V

Max. Voltage Imbalance
3 % of rated supply voltage

True Power Factor
> 0.4 nominal at rated load

Displacement Power Factor
> 0.98

Switching on Input Power Supply
Maximum twice/minute

Environment According to EN60664-1
Overvoltage category III/pollution degree 2


Output

Rated Output Voltage
0-100 % of supply voltage

Output Frequency
0-200 Hz (Adv. Vector Control Plus Mode)
0-400 Hz (Volts/Hertz Mode)

Switching on Output
Unlimited

Accel/Decel Times
0.05 to 3600 s

Overload Current Rating
150 % of drive rated current for 1 minute


Control

Control Method
Sinusoidal PWM Control (V/Hz with torque vector control)

Switching Frequency Select
2 kHz
4 kHz
8 kHz
12 kHz
16 kHz

Operation Method
Keypad operation: Hand, Off, Auto
Digital Input: Programmable for Start/Stop, Forward/Reverse, Jog
Timer operation: Stop after predetermined time frame
Link operation: RS-485 Modbus RTU

Frequency Reference Setting
Up or Down buttons on keypad or external reference

Analog Input
Built in Potentiometer
0-10 Vdc analog input
4-20 ma analog input

Preset Speeds
8 presets via digital inputs

Link Operation
Drive RS-485 or Modbus RTU

Second Reference Setting
Switch from speed reference 1 to reference 2 via digital input

Trim Reference Setting
Available for speed reference offset via potentiometer, voltage input, or current input

Acceleration/Deceleration Time
0.05-3600 seconds (two acceleration and deceleration rates are selectable via digital inputs.
Acceleration and deceleration patterns can be selected from linear or S-curve

DC Injection Braking
Starting frequency: 0.0 to 400 Hz
Braking time: 0.0 to 60.0 seconds
Braking level: 0-150 % of rated current

Frequency Limit
0 to 400 Hz

Jump Frequency Control
2 jump (or skip) frequencies via parameter set to avoid mechanical vibration

Jogging Operation
Operation via On key or digital input (Fwd or Rev)

Auto-Restart After Power Failure
Restarts the drive without stopping after instantaneous power failure

Slip Compensation
Maintains motor at constant speed with load fluctuations

Energy Savings
Controls output voltage to minimize motor loss during constant speed operation

Start Mode Function
This functionality smoothly catches a spinning motor


Logic Controller (LC)

Logic Controller Events
Over 23 types of Programmable Events

Comparators
Array of 4 Comparators

Timers
Array of 3 Timers, adjustable from 0.0 to 3600 sec

Logic Rules
Array of 4 Boolean Logic Rules

Logic Controller States
Array of 20 Logic Controller Action States


Process Controller (PI)

Process CL Feedback Select
Analog input 1
Analog input 2
Local bus reference
No function
Pulse input

Process PI Control
Inverse
Normal

Process PI Anti Windup
Disabled
Enabled

Process PI Start Speed
0.0 to 200 Hz

Process PI Proportional Gain
0.00 to 10.00

Process PI Integral Gain
0.10 to 9999 s

Process PI Feed Forward Factor
0 to 400 %

On Reference Bandwidth
0 to 200 %


Indication

LEDs
Green - drive is on
Red - indicates an alarm
Yellow - indicates a warning



Print Back