Koffler Electrical Mechanical Apparatus Repair, Inc
527 Whitney St
San Leandro, CA 94577 USA
Phone: 510-567-0630
Fax: 510-567-0636
Email: info@koffler.com
Website: http://www.koffler.com
All Categories > Products > Variable Frequency Drives > AF-600 FP Fan and Pump Drives > AF-600 FP Fan and Pump Drives - 575V, 3-Phase, 50/60 Hz Input > Item # 6KFP53100X9XXXA1  


Item # 6KFP53100X9XXXA1, AF-600 FP Fan and Pump Drives - 575V, 3-Phase, 50/60 Hz Input
List Price $11,800.00

100 HP, 575 V





Specifications  · Environmental Conditions  · Standards  · Input Power Supply  · Output  · Control  · Logic Controller (LC) Sequencer  · Process Controller (PID)  · Operation  · Keypad  · RS485 Modbus RTU Serial Communications  · Mounting Clearance

Specifications

Voltage
575 V

Phase
Three

Frequency
50/60 Hz

HP Rating
100

kW Rating
75

Rated Output Amps
100

Overload Amps (110% 1 Min)
110

Standard Unit Includes
IP20 (9) Chassis Keypad

Factory Installed Keypad
Keypad

Drive Type
IP20/Open

A1/B RFI Filter
No A1/B RFI Filter Installed

Load Share
Standard Unit

Conformal Coating
No Conformal Coatings

Revision
1st Revision

Option Kits
NEMA1ACC4, Field Installed IP21/NEMA 1 Add-On Option Kits for AF-650 GP General Purpose Drive ($175.00)

Options and Accessories
OPC24VPS, 24V DC External Supply Module ($240.00)
OPC4XPED, Pedestal Kit ($875.00)
OPCAIO, Analog I/O Module ($500.00)
OPCBAC, BacNet Communications Module ($600.00)
OPCCOVER4142, Power Shield for Unit Size 41 and 42 Drive ($520.00)
OPCCOVER51, Power Shield for Unit Size 51 Drive ($1,305.00)
OPCDEV, DeviceNet Communications Module ($600.00)
OPCEIP, Ethernet IP Communications Module ($700.00)
OPCGPIO, General Purpose I/O Module ($475.00)
OPCLON, LonWorks Communications Module ($600.00)
OPCMBTCP, Modbus TCP Communications Module ($700.00)
OPCPDP, Profibus DP Communications Module ($725.00)
OPCPRT, ProfiNet RT Communications Module ($700.00)
OPCRLY, Relay Output Module ($475.00)
OPCRMKNC, Remote Mounting Kit without cable ($85.00)
OPCTERM, Screw Terminal Accessory ($25.00)
OPCUSB, USB Kit for All Drives up to Unit Size 5X ($75.00)
OPCUSB6X, USB Kit for All Unit Size 6X drive ($225.00)
RMKYPDAC, Remote Mounting Kit for Graphical LCD Keypad ($95.00)


Environmental Conditions

Enclosure
IP00 Chassis
IP20 Chassis
IP21/NEMA 1
IP54/NEMA 12
IP55/NEMA 12

Plenum Ratings
Drives and options are UL rated for installation inside air handling ducts and plenums

Installation Location
Do not install in locations where product could be exposed to dust, corrosive gas, inflammable gas, oil mist, vapor, water drops or direct sunlight. There must be no salt in the atmosphere. Condensation must not be caused by sudden changes in temperature. For use at altitudes of 3280 ft. (1000 M) or less without derating.

Storage Temperature
-25 to 65 ºC

Ambient Temperature1
-10 to +50 ºC

Ambient Humidity
5 to 95 % RH (non-condensing)

Vibration
1.0 g

Cooling Method
Fan Cooled all ratings. Fan Control Auto, 50% level, 75% level, 100% level adjustable
1 24 hour average max of 45 ºC


Standards

Approvals
CE, UL, cUL, and C-Tick
Suitable for use on a circuit capable of delivering not more than 100,000 rms symmetrical amperes for 208/230 V and 460 V.


Input Power Supply

Rated Input AC Voltage
200-240 Vac, 3-phase, 50-60 Hz, ± 10 % V
380-480 Vac, 3-phase, 50-60 Hz, ± 10 % V
525-600 Vac, 3-phase, 50-60 Hz, ± 10 % V

Max. Voltage Imbalance
3 % of rated supply voltage

True Power Factor
> 0.9 nominal at rated load

Displacement Power Factor
> 0.98

Switching on Input Power Supply
Maximum twice/minute up to 10 HP, Maximum once/minute above 10 HP

Environment According to EN60664-1
Overvoltage category III/pollution degree 2

DC Link Reactors
Built-In DC Link Reactors on all ratings

RFI Filters
Built-In RFI Filters to reduce noise generated by the drive. Meets industrial standards.


Output

Rated Output Voltage
0-100 % of supply voltage

Output Frequency
0-1000 Hz; 0-800 Hz for 460 V above 125 HP and 525-690 V above 125 HP

Switching on Output
Unlimited

Accel/Decel Times
1 to 3600 s

Control Method
Sinusoidal PWM Control (V/Hz, Avd. Vector Control)


Control

Starting Torque
110 % starting torque for 1 minute (variable torque)

Carrier Frequency (Motor Noise)
1 kHz
1.5 kHz
2 kHz
2.5 kHz
3 kHz
3.5 kHz
4 kHz
5 kHz
6 kHz
7 kHz
8 kHz
10 kHz
12 kHz
14 kHz
16 kHz

Torque Boost
0-300 % setting to compensate voltage in relation to the load at low speed

Acceleration/Deceleration Time
0.01-3600 seconds (4 acceleration and deceleration times are selectable via digital inputs. Acceleration and deceleration patterns can be selected from linear or S-curve)

Data Protection
Password Protection for Quick Menu or Main Menu, 0-9999.

Pattern Operation
Settings via Built-In Logic Controller Sequencer

Jump Frequency Control
4 jump (or skip) frequencies via parameter set to avoid mechanical vibration

Slip Compensation
Maintains motor at constant speed with load fluctuations

Torque Limit Control
Output torque can be controlled within a range of 0.0 to 110 % (0.1 and steps)

8 Preset Speeds
8 programmable preset speeds selectable by 3 digital inputs

Preset Speeds
8 presets via digital inputs

Built-In Communications
Drive RS-485, Modbus RTU, Metasys N2, or Apogee FLN P1

Trim Reference Setting
Available for speed reference offset via potentiometer, voltage input, or current input

DC Injection Braking
Starting frequency: 0.0-1000 Hz, 0-800 Hz for 460 V above 125 HP and 525-690 V above 125 HP
Braking time: 0.0-60.0 seconds
Braking level: 0-100 % of rated current

Jogging Operation
Operation via On key or digital input (Fwd or Rev)

Auto-Restart After Power Failure
Restarts the drive without stopping after instantaneous power failure

Energy Savings
Controls output voltage to minimize motor loss during constant speed operation

Start Mode Function
This functionality smoothly catches a spinning motor

Fire Override Mode
Overrides drive's protective features and keeps motor running

Pump Cascade Controller
Distributes running hours evenly over up to 4 pumps

Sleep Mode
Drive detects low or no flow conditions and adjusts output

Dry Pump Detection
Detects pump operation and can set off alarm, shuts off, or other programmed actions

Belt Monitoring
Drive can detect relationship between current and speed to recognize a broken belt

Real Time Clock
With programmable timed actions


Logic Controller (LC) Sequencer

Logic Controller Events
Up to 38 Programmable Events

Comparators
Array of 6 Comparators

Timers
Array of 8 Timers, adjustable from 0.0 to 3600 sec

Logic Rules
Array of 6 Boolean Logic Rules

Logic Controller States
Array of 20 Logic Controller Action States


Process Controller (PID)

Process PID Controller
4 Auto Tune PID Controllers Built-In

Process CL Feedback Select1
Encoder Option Module
Motor Feedback
No function
Resolver Option Module
Separate Encoder

Process PID Control
Inverse
Normal

Process PID Anti Windup
Disabled
Enabled

Process PID Start Speed
0.0 to 200 Hz

Process PID Proportional Gain
0.00 to 10.00

Process PID Integral Time
0.1 to 10000.0 ms

Process PID Differential Time
0.0 to 10 s

Process PID Differential Gain
1.0 to 50.00

Process PID Feed Forward Factor
0 to 500 %

On Reference Bandwidth
0 to 200 %
1 Up to 2 references.


Operation

Operation Method
Keypad operation: Hand, Off, Auto
Digital Input: Programmable for Start/Stop, Forward/Reverse, Jog
Timer operation: Stop after predetermined time frame
Communications: RS-485 Modbus RTU, Metasys N2, and Apogee FLN P1
USB Port for programming drive with optional PC Software

Frequency Reference Signal
Left or Right Arrow buttons on keypad in Manual Mode
Speed Potentiometer: 0 to +10 Vdc, 10 to 0 Vdc
0-10 Vdc analog input
0/4-20 ma analog input

References
Up to 3 Input References can be selected from Analog
Input #1 or #2, Frequency Input #1 or #2, Network, or Potentiometer

Digital Input Signal
No Operation
Reset after drive trip or alarm
Drive at stop with no holding current
Quick Stop according to Quick Stop Decel Time 1
Stop on input going low
Start
Maintained Start after signal applied for Minimum of 2 ms
Reversing
Start Reverse
Enable Start Forward only
Enable Start Reverse only
Jog
Multi-Step Frequency selection (1 to 8 Steps)
Hold Drive Frequency
Hold Reference
Speed Up; activated by Hold Drive Frequency or Hold Reference
Slow Down; activated by Hold Drive Frequency or Hold Reference
Drive Parameter Setup Select 1-4
Precise Start or Stop; Activated when drive parameter precise start or stop function is selected
Catch Up or Slow Down; Activated by signal to add to or subtract from input reference to control speed
Pulse Input selectable from 100-110000 Hz
Accel / Decel Time select. Set Input to Accel / Decel Times 1 to 4
Digital Potentiometer Input Increase or Decrease
Mechanical Brake Feedback


Keypad

Keypad Features
LCD Display with 6 Alpha-numeric lines. Multi-Language Support
Hot Pluggable, Remote Mount Option, and CopyCat Feature, IP65 rating when remote mounted on enclosure
LED's - Green - drive is on, Yellow - indicates a warning, Red - indicates an alarm, Amber - Indicates active Menu keys and H-O-A keys

Keypad Keys
Status - shows status of drive
Quick Menu - Enters Quick Start, Parameter Data Check, or Trending Modes
Main Menu - Used for programming all drive parameters
Alarm Log - Used to display Alarm list
Back - Reverts to previous step or layer in parameter structure
Cancel - Used to cancel last change or command
Info - Displays information about a command, parameter, or function in any display.
Hand/Off/Auto - Used to control drive locally or put drive in remote mode
Reset - Used to reset Warnings or Alarms

Password
2 Level Password Protection

Alternate Motor Parameters
Up to 4 Separate complete parameter set-ups are available

Graphical Trending
Trend - Speed, Power, or Frequency


RS485 Modbus RTU Serial Communications

Physical Level
EIA/RS485

Transmission Distance
1640 ft
500 m

Node Address
32

Transmission Speed
2400 bits/s
4800 bits/s
9600 bits/s
19200 bits/s
38400 bits/s
115200 bits/s

Transmission Mode
Half Duplex

Transmission Protocol
Modbus RTU

Character Code
Binary

Character Length
8 bits

Error Check
CRC


Mounting Clearance
All AF-650 GP drives can be mounted Side-by-Side without spacing. For all drives rated 125 HP or below allow 3.4 inches (100 mm) free space above and below. For all drives rated 150 HP and above allow 8.9 inches (225 mm) free space above and below.



Print Back