-
General Purpose TEFC Motors
general-purpose-tefc-motors
-
Leeson Single Phase Totally Enclosed Fan Cooled (TEFC) Motors
- Rigid Base
- Capacitor Start
- General Purpose
-
Leeson Three Phase Totally Enclosed Fan Cooled (TEFC) Motors
- Rigid Base
- General Purpose
-
Leeson Cast Iron Three Phase Totally Enclosed Fan Cooled (TEFC) Motors
- 150 & 170 Series
- Rigid Base
- General Purpose
But that's only part of the story. LEESON 150 and 170-series cast iron motors are extremely versatile and can be field converted in minutes to a number of different configurations, including: - Severe Duty TEFC (using cast iron fan guard kit)
- F2 mounting (by reassembly)
- C face with rigid base (from stock or using C face kit)
- D flange with base (using D flange kit)
CSA certified under report number LR62104
CSA Energy Efficiency Verification report number EEV78720-1
UL recognized insulation system, file number E55555 and UL recognized construction, file number E57948 on all cast iron motors produced in June 2003 and later.
LEESON’s Inverter Rated Insulation System (IRIS™) provides superior motor protection against voltage spikes induced by variable frequency drives. This total insulation system protects better than spike-resistant magnet wire alone. Specially formed phase insulation, cushioned and sleeved connections (from the leads all the way into the turns), and deep-penetrating, non-hygroscopic, high temperature varnish are just a few features contributing to the extra protection. All this plus second generation, spike-resistant magnet wire. The IRIS™ total insulation system is standard at no extra cost in all LEESON stock NEMA three-phase motors, 1 HP and larger.
Note 150 and 170 Series Drip-Proof and TEFC motors in NEMA frames 180T thru 447T can be field converted, by reassembly, to F2 conduit box locations.
- Capacitor Start
- General Purpose
- TEFC
- C Face Less Base
- Single Phase
- Capacitor Start
- General Purpose
- TEFC
- C Face with Base
- Single Phase
- General Purpose
- TEFC
- C Face Less Base
- Three Phase
- General Purpose
- TEFC
- C Face With Base
- Three Phase
- TEFC
- Single Phase Resilient Base
Totally enclosed, fan cooled design makes these motors ideal for replacement in tough agricultural and industrial applications where contaminants cause failure of open drip-proof motors.
Resilient Base Motors Single Phase
General Purpose or Fan & dService Moderate Starting Torque
General Specifications:
Industrial quality, resilient (cradle) mounted, capacitor start-type, ball bearing motors for fan and blower service. Moderate starting torque electrical more
- TEFC
- Three Phase Resilient Base
Totally enclosed, fan cooled design makes these motors ideal for replacement in tough industrial applications where contaminants cause failure of open drip-proof designs.
Resilient Base Motors Three Phase
General Purpose or Fan & Blower Service Moderate Starting Torque
General Specifications:
Industrial quality, resilient (cradle) mounted, three phase, ball bearing motors for fan and blower service. Moderate starting torque electrical design to reduce stress more
- Rigid Base
- Single Phase
- TEFC
- Rigid Base
- Single Phase
- TEFC
Motors specially suited for hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. Capacitor start, capacitor run construction for reduced amperage.
- Three Phase
- TEFC
- Rigid Base
- EPACT motors.
General Specifications:
Motors designed for air compressor, pump, and fan and blower duty applications which require high breakdown torque and rugged mechanical construction.
- Single Phase
- TEFC
- Rigid Base
General Specifications:
Motors designed for woodworking equipment such as table saws, planers, etc.
Totally enclosed designs prevent motor problems caused by wood dust and shavings.
- Single Phase
- TEFC
- C Face less Base
Totally enclosed fan cooled motor produces extra high breakdown torques for maximum cutting power.
Supplied with 8-foot cord and 115 V plug, on/off toggle switch. CW rotation, facing lead end. Replaces Delta motor number 62-042.
- Single Phase
- TEFC
- Rigid Base
Totally enclosed fan cooled motor produces extra high breakdown torques for maximum cutting power.
Supplied with 8-foot cord and 115 V plug, on/off toggle switch. CW rotation, facing lead end. Replaces Delta motor number 62-042.
- Single Phase
- TEFC
- Delta Unisaw® Mounting
Special Mounting:
Motor pivots on rod for belt tensioning. Totally enclosed fan cooled motor produces extra high breakdown torques for maximum cutting power. Has 1 3/4" long shaft, 3/4" diameter with keyway. Added 54" cord to all motors 1 1/2-4 HP. Catalog numbers 120925 and 120997 replace Delta UNISAW® motor 83-621 (1 1/2 HP); 120728 and 120998 replace Delta UNISAW® motor 83-651 (3 HP).
Applications:
For use on turbine, mix flow and propeller pumps.
