Koffler Electrical Mechanical Apparatus Repair, Inc. - Leeson Stainless Frame TENV C Face Less Base Washguard II Motors

Stainless Frame

Three Phase

TENV

C Face Less Base

Superior, extended life in severe environments

Paint-free exterior - stainless frame and conduit box lid, specially processed endshields and conduit box housing

Etched stainless steel nameplate

Proven WASHGUARD mechanical and electrical features

IRIS™ insulation system

BISSC certified for baking industry

Meets IP55 enclosure protection

Three phase motors are suitable for use on VFDs

10:1 ratio for constant or variable torque at 1.0 SF

LEESON Severe Duty, stainless frame, WASHGUARD II motors are designed for superior extended service in severe environments. Typical applications include food processing areas requiring frequent sanitation procedures using high pressure cleaning with concentrated caustic solutions, areas of high humidity and in chemical environments.

Standards and Approvals
UL component recognized, file number E57948, guide number PRGY2. Energy efficiency ratings are verified by an independent testing laboratory. CSA Energy Efficiency Verification Program, report number EEV 78720-1. Construction is CSA Certified for safety report number LR33543. WASHGUARD II motors are certified to the Baking Industry Sanitation Standard #29 and listed under BISSC authorization number 769.

Request Information

Unit of Measure

Items	114394 Leeson Stainless Frame TENV C Face Less Base Washguard II Motors Request Quote	114395 Leeson Stainless Frame TENV C Face Less Base Washguard II Motors Request Quote	114437 Leeson Stainless Frame TENV C Face Less Base Washguard II Motors Request Quote	121109 Leeson Stainless Frame TENV C Face Less Base Washguard II Motors Request Quote	114581 Leeson Stainless Frame TENV C Face Less Base Washguard II Motors Request Quote
Base	N/A C Face Less Base
Enclosure Type	N/A Totally Enclosed Non-Ventilated
Phase	N/A Three
HP	N/A 1/2	N/A 3/4	N/A 1	N/A 1	N/A 1 1/2
RPM 60 Hz	N/A 1725
Voltage	N/A 208 V230 V460 V
FL Amps 230 V	N/A 1.6	N/A 2.3	N/A 3.0	N/A 3.0	N/A 4.4
% FL Eff.	N/A 78.5	N/A 80.0	N/A 81.5	N/A 81.5	N/A 84.0
NEMA Frame	N/A 56C	N/A 56C	N/A 56C	N/A 143TC	N/A 56C
Disc. Sym.	N/A A	N/A A	N/A A	N/A B	N/A A
C Dimension	N/A 11.06 in	N/A 11.56 in	N/A 12.06 in	N/A 12.13 in	N/A 12.69 in
Approx. Weight	N/A 30 lbs	N/A 34 lbs	N/A 44 lbs	N/A 40 lbs	N/A 45 lbs
Rating	N/A	N/A	N/A Inverter Rated	N/A Inverter Rated	N/A Inverter Rated
Agency Approvals	N/A BISSC Certified EPACT Mandates IRIS System
Mechanical Features	N/A These motors have an entirely paint free exterior with 300 series stainless steel motor body, conduit box lid, shaft extension, hardware, fasteners and an etched motor data plate. To enhance chemical and corrosion resistance, all surfaces of the end bells and conduit box are processed using a U.S. Department of Agriculture approved technique. This proprietary process has been tested and qualified for more than 2,500 hours of salt spray endurance for external surfaces, and 1,000 hours for internal surfaces. This process has proven successful in food wash down applications and has shown excellent corrosion resistance. Shaft seals, slingers and one-way stainless steel drains retard entrance of contaminants and water into the motor. Multiple, repositional drains provided for all angle mounting, release any water that does enter the motor from hose downs or condensation. Chemically resistant, tough nitrile gaskets and a threaded entrance for power connection also restrict entrance to the motor’s interior. Nylon gaskets are used to seal bolt heads. Bearings used are double sealed and prelubricated with moisture resistant Exxon POLYREX® EM high temperature lubricant.
Electrical Features	N/A Efficiencies meet EPACT mandates for covered motors when tested without shaft seals. High temperature, moisture resistant IRIS insulation system assures long life on inverter service. Windings are immersed and cured in polyester insulating compound.
Manufacturer	N/A Leeson