40 HP, 460 V
As standard, all Enclosed Redundant Drives include two door-mounted keypads, an HOA operator, an E-Stop button (for UL508A compliance), a Drive 1 / Off / Drive 2 switch, a power on light, individual drive run and fault lights, a customer terminal board for control connections, A2 rated EMI filters, Modbus RTU, Metasys N2, and Apgee FLN P1 communication protocols, the equivalent of 5% line reactors, and two interlocked drive output contactors.
As standard, all Enclosed Redundant Drives include two door-mounted keypads, an HOA operator, an E-Stop button (for UL508A compliance), a Drive 1 / Off / Drive 2 switch, a power on light, individual drive run and fault lights, a customer terminal board for control connections, A2 rated EMI filters, Modbus RTU, Metasys N2, and Apgee FLN P1 communication protocols, the equivalent of 5% line reactors, and two interlocked drive output contactors.
Unit of Measure
Specifications
Voltage (AC) |
N/A 460 V |
Phase |
N/A Three |
Frequency |
N/A 60 Hz |
Variable Torque HP Rating |
N/A 40 |
Configuration |
N/A Redundant Drive Bypass |
Enclosure Type |
N/A Type 1 |
Reactor |
N/A Standard Reactor, eqv 5% Line Impedance |
Disconnect/Circuit Breaker |
N/A Disconnect, Fused (100k AIC) |
Communications |
N/A Use characters and adders listed under Communication Options. One card will be provided for each drive so the adder shown should be doubled (e.g., $600 for a single drive, $1200 for a Redundant drive). |
