40 HP, 208 V
As standard, all Enclosed 3 Contactor Bypass Drives include a fusible disconnect switch and fuses, a door-mounted keypad, an HOA operator, an E-Stop button (for UL508A compliance), a Drive/Off/Bypass switch, a Test/Isolate/Normal switch power on, enable, bypass and overload lights, a customer terminal board for control connection, an A2 rated EMI filter, Modbus RTU communication protocols, the equivalent of 3 % line reactor, a drive output contactor interlocked with a FVNR bypass contactor, a drive line isolation contactor, and Class 20/30 overloads.
As standard, all Enclosed 3 Contactor Bypass Drives include a fusible disconnect switch and fuses, a door-mounted keypad, an HOA operator, an E-Stop button (for UL508A compliance), a Drive/Off/Bypass switch, a Test/Isolate/Normal switch power on, enable, bypass and overload lights, a customer terminal board for control connection, an A2 rated EMI filter, Modbus RTU communication protocols, the equivalent of 3 % line reactor, a drive output contactor interlocked with a FVNR bypass contactor, a drive line isolation contactor, and Class 20/30 overloads.
Unit of Measure
Specifications
Voltage (AC) |
N/A 208 V |
Phase |
N/A Three |
Frequency |
N/A 60 Hz |
Constant Torque HP Rating |
N/A 40 |
Max. Cont. Current |
N/A 115 |
Configuration |
N/A 3 Contactor Bypass |
Enclosure Type |
N/A Type 1 |
Reactor/Power |
N/A Standard Reactor, eqv. 3% Line Impedance |
Disconnect/Circuit Breaker |
N/A Disconnect, Fused (100k AIC) |
