Request Information
350/800 HP, 230/460 V

The DV-300 is a 3-phase, six-pulse converter which is available in either non-regenerative or fully regenerative design. The DV-300 drive controller allows for precise regulation of motor speed, current, and field (field weakening and field economy are standard). This performance and chassis packaging allows the DV-300 to be applied easily in a wide array of industries including textiles, paper converting, plastics converting, corrugating, wire drawing, rubber and plastics, metal processing, machine tools, material handling, and more.

To allow for easy start-up, the DV-300 offers two choices: an optional keypad programmer or the standard GE toolbox. The Windows®-based GE toolbox enables the user to set parameters and program converter I/O and self-tune the regulators. Archiving the drive setup allows the user to have preconfigured setups available for similar applications. These are easily maintained and save valuable time.

The DV-300 drive can handle difficult applications and complex operations with the addition of the digital general function (DGF) card. The DGF card is an optional Intel® microprocessor-based board which allows application specific regulators, provides special sequencing operations, and solves other drive control challenges.

A wide range of advanced communication capabilities are available for the DV-300 drive. The drive communicates on a high-speed serial link including the following protocol options: DeviceNet™, Profibus-DP, Interbus-S, and Genius®. These communication options allow the drive, system control, and the data collection system to be easily integrated. Other options for the DV-300 include additional I/O, removable keypad programmer, and keypad door-mount kit.
Unit of Measure

Specifications

HP and Voltage

 N/A 350 hp, 230 V 800 hp, 460 V

Output DC (Nominal Current)

 N/A 1350

Number of Quadrants

 N/A 4 quadrants (Regenerative/Reversing)

Voltage Rating

 N/A 500/max Vac for Q3

Rated Field Current

 N/A 40 A

Accessories

 N/A , RS 485/232 Converter ($170.00)
, DeviceNet Option Card (DGF Card Required) ($240.00)
, Digital General Function Card ($1,230.00)
, SBI DeviceNet Option Card (without DGF) ($745.00)
, Interbus-S Bus Communication Option Card ($805.00)
, External Keypad Mounting Kit ($75.00)
, AV/DV-300 Keypad Programmer ($290.00)
, Profibus-DP Bus Communication Option Card ($745.00)
, I/O Expansion Option Card (Discrete and Analog) ($230.00)
, Win+Drive ($5,000.00)
, Digital Encoder to Sinusoidal Converter (DIN rail mount) ($220.00)
, Genius Communication Option Card ($1,450.00)

Notes

 N/A Please contact customer service for latest revision.

Non-Stock: Includes drive controller and external bridge. Please contact factory for more information.

Programmable

Four Accel/Decel Ramps

 N/A Each independently adjustable from 0-65,000 s

Ramp Types: Linear, S-Curve

 N/A S-curve shape is adjustable through special time constant parameters

Min./Max. Speed Limits

 N/A With independent adjustments for forward and reverse speeds

Adjustable Current Limits (Motoring and Braking)

 N/A 150 % for 60 s standard

Seven Preset Speeds

 N/A Selectable through three contact closures

Password Protection

 N/A 5-digit combination, selectable by user

Field Control

 N/A Current regulation Disable (for external field supply) Field economy Field weakening voltage regulation

Jog Functions

 N/A Reference from internal parameter or external reference potentiometer
Can be programmed with or without linear time

Zero Speed Functionality

 N/A Includes zero speed level, zero speed threshold, and delay detection

Tach Feedback Bypass

 N/A Drive automatically switches to armature voltage feedback if the tach signal is lost

Catch-a-Spinning Motor (Auto Capture)

 N/A Allows restart of drive with a rotating motor

Reset to Default Parameters

 N/A Aids in start-up and troubleshooting

Protective Functions

Faults Detected

 N/A Communication card failure Enable sequence error Fault data history (last ten faults) Field loss Heatsink over temperature Motor over temperature Motor overload Option card failure Overcurrent Over voltage/under voltage Tach loss User's external faults

Standard I/O

Analog Inputs

 N/A Three differential, 12 bit
Programmable and selectable for ± 10 Vdc, 0-20 mA; 0-10 Vdc, 4-20 mA

Digital Inputs

 N/A Four fixed 24 Vdc (enable, start/stop, fast stop, external fault)

Digital Outputs

 N/A One drive OK normally open contact
One programmable normally open contact

Built-in RS 485 Communication Port

 N/A Allows communication with drive for setup and troubleshooting

Sinusoidal Encoder Input (with Internal 5 Vdc Available from Drive)

 N/A Provides the best speed regulation

Digital Tach (with Internal 24 Vdc Available from Drive)

 N/A Utilizes standard digital tachometer for speed regulation

DC Tach Input

 N/A Utilizes analog dc tachometers for speed regulation

Environmental Operating Conditions

Ambient Temperature

 N/A 0 to 40 ºC

Ambient Humidity

 N/A 5 to 85 % RH (non-condensing)

Altitude

 N/A To 3300 ft (1000 m) without derating

Enclosure

 N/A IP20 - Open chassis

AC Input

Armature

 N/A 230-500 Vac ± 10 %, 3-phase

Control Power

 N/A 115-230 Vac ± 10 %, 1-phase

Field

 N/A 230-460 Vac ± 10 %, 1-phase

Performance

Features

 N/A Regenerative and Non-Regenerative
150 % Overload for 60 S
Speed, Current, and CEMF Regulation
16 Bit Microprocessor

Speed Regulation

 N/A CEMF = 1 - 2 % DC tach = up to 0.1 % Digital encoder = 0.02 % Sinusoidal enc. = 0.01 %

Electrical Standards and Codes

Agency Approvals

 N/A CE, cUL

IEC

 N/A Low voltage directive #EN50178

Options

Options

 N/A 2-line backlit, detachable, and removable keypad programmer Communications: DeviceNet, Profibus-DP, Interbus-S, and Genius DGF 386 (digital general function card) Remote keypad mounting kit

TBO Digital or Analog Eexpansion Modules (Maximum of two) per TBO Board

 N/A Four 24 Vdc digital inputs Four 24 Vdc digital outputs Two +10 Vdc analog outputs