300 HP, 1800 RPM, NEMA Frame 449T, 460 V, TEFC
Designed for use in blowers, fans, pumps, conveyors, material handling, compressors, and other inverter duty applications.
Designed for use in blowers, fans, pumps, conveyors, material handling, compressors, and other inverter duty applications.
Unit of Measure
Poles |
N/A 4 |
Frequency |
N/A 60 Hz |
NEMA Design |
N/A A |
Agency Approvals |
N/A CSA - Motors UL - Component and Insulation System Recognition |
Altitude |
N/A 3300 ft |
Ambient Temperature |
N/A 40 ºC |
Balance/Vibration |
N/A 0.055 in/sec |
Bearing Caps |
N/A Both ends are gasketed |
Bearing Protection |
N/A Recessed Slinger, Inpro Seal kit available |
Bearing Type |
N/A Ball |
Centered Core |
N/A Allows F1-F2 field conversion |
Conduit Box |
N/A Gasketed and rotatable, Fabricated Steel |
Cooling |
N/A Totally Enclosed Blower Cooled also available |
Drains |
N/A Brass T-drains |
End Shield |
N/A Cast Iron |
Fan |
N/A Bronze Non-Sparking Plastic |
Fan Cover |
N/A Cast Iron |
Fasteners |
N/A SAE, Grade 5 |
Foot Draft Angle |
N/A ±5 º |
Foot Flatness |
N/A 0.005 in |
Frame Material |
N/A Cast Iron |
Grease |
N/A Polyurea |
Ground |
N/A Ground lug in Conduit Box |
Insulation Class |
N/A Class F (Class H materials with Class F leads) |
Insulation System |
N/A Non-Hygroscopic, Anti-Fungus, meets NEMA MG1-31 |
Inverter Capabilities |
N/A Variable Torque inf:1, Constant Torque inf:1 |
L10 Bearing Life |
N/A Direct Coupled: 130000 hrs, Belted: 26280 hrs, Belted L10a: 50000 |
Lifting Means |
N/A 2 Lugs cast into frame |
Mounting |
N/A F1 |
Mounting Holes |
N/A 2 per foot |
Nameplate |
N/A Stainless Steel includes Weight, Vibration Limit, Service Factor, Speed Range Constant Torque and Constant HP |
Paint |
N/A Gray, Epoxyester |
Relubrication |
N/A Both ends, extended through the fan cover |
Rotor |
N/A Cast Aluminum |
Shaft TIR |
N/A Meets IEEE 841, 0.001 in for shaft diameter 1.625 in and smaller, 0.0015 in for shaft diameter greater than 1.625 in. |
Tach Mounting |
N/A ODE C-face provision for tach mounting. 8.5" rabbet |
Temperature Rise1 | N/A 80 ºC |
Tests |
N/A NEMA Routine Report including Vibration supplied with motor, IEEE 112 |
Thermal Protection |
N/A 3 NC Thermostats |
Time Rating |
N/A Continuous |
Vibration Pads |
N/A Cast in vibration pads for repeatable measurements |
Warranty |
N/A 12 months from date of purchase or 18 months from date of shipment, whichever occurs first |
N/A
|
- 1 At 1.0 SF sine wave power, 105°C PWM power