3 HP, 1750 RPM, NEMA Frame 182TC, 230/460 V,
- Three Phase
- C Face with Base
- Division I, Division II, Class I, Groups C & D-Class II Groups F & G with Conduit Box
- EPACT motors
Explosion-proof For Hazardous Locations
Underwriters Laboratories and Canadian Standards Association Listed
General Specifications:
These explosion-proof motors are designed and approved for application in hazardous environments having certain explosive gases or materials present.
Application Notes:
These motors must be more
3 HP, 1750 RPM, NEMA Frame 182TC, 230/460 V,
- Three Phase
- C Face with Base
- Division I, Division II, Class I, Groups C & D-Class II Groups F & G with Conduit Box
- EPACT motors
Explosion-proof For Hazardous Locations
Underwriters Laboratories and Canadian Standards Association Listed
General Specifications:
These explosion-proof motors are designed and approved for application in hazardous environments having certain explosive gases or materials present.
Application Notes:
These motors must be applied in accordance with the National Electrical Code, Article #500. A partial listing of explosive agents is noted below. Consult NFPA Publication 497M for a complete listing. Please note subheads above each column for qualifications of LEESON motors.
Unit of Measure
Specifications
Base |
N/A C Face with Rigid Base |
Phase |
N/A Three |
HP |
N/A 3 |
RPM 60 Hz |
N/A 1750 |
Voltage |
N/A 230 V460 V |
FL Amps 460 V |
N/A 4.0 |
% FL Eff. |
N/A 87.5 |
NEMA Frame |
N/A 182TC |
Disc. Sym. |
N/A C |
C Dimension |
N/A 17.12 in |
Approx. Weight |
N/A 91 lbs |
Frame Construction |
N/A Cast Iron |
Manufacturer |
N/A
Loading zoom Leeson |
Technical Details
N/A
Class I Group A: Acetylene Group B: Butadiene, ethylene oxide, hydrogen, propylene oxide, manufactured gases containing more than 30% hydrogen by volume. Group C: Acetaldehyde, cyclopropane, diethyl ether, ethylene. Group D: Acetone, acrylonitrile, ammonia, benzene, butane, ethanol, ethylene dichloride, gasoline, hexane, isoprene, methane (natural gas), methanol, naphtha, propane, propylene, styrene, toluene, vinyl acetate, vinyl chloride, xylene. Class II Group E: Aluminum, magnesium and other metal dusts with similar characteristics. Group F: Carbon black, coke or coal dust. Group G: Flour, starch or grain dust. |