Request Information
50 HP, 3550 RPM, NEMA Frame 324JP, 230/460 V
  • Three Phase
  • Drip-Proof
  • Rigid Base
General Specifications:
For use with close-coupled pumps having NEMA JP mounting and shaft dimensions. In such applications, the pump impeller is mounted directly on the motor shaft. Designed for continuous duty service. All motors listed are 1.15 Service Factor.
Unit of Measure

Base

 N/A Rigid Base

Enclosure Type

 N/A Drip-Proof

Phase

 N/A Three

HP

 N/A 50

RPM 60 Hz

 N/A 3550

Voltage

 N/A 230 V460 V

FL Amps 230 V

 N/A 124.0

% FL Eff.

 N/A 89.5

NEMA Frame

 N/A 324JP

Disc. Sym.

 N/A C

C Dimension

 N/A 29.12 in

Approx. Weight

 N/A 450 lbs

NEMA Service Factor

 N/A 1.15

Frame Construction

 N/A Cast Iron

Rating

 N/A Inverter Rated

Mechanical Features

 N/A Open drip-proof construction with rigid base mounting. Locked bearing on shaft end limits axial shaft movement. For use where the environment is relatively clean and dry. For outdoor use, an enclosure or drip cover may be preferred. See the Drip Cover Kit table. Some 182-4JP frame motors have enclosed end shields as standard with frame meeting the 12º drip-proof requirement. No drip cover is needed, or shown in the table, for these motors.

Electrical Features

 N/A UL Recognized and CSA Certified. Single phase designs are capacitor start, induction run.

Manufacturer

 N/A
Leeson