Request Information
10 HP, 3450 RPM, NEMA Frame 215JP, 230 V
  • Single Phase
  • Drip-Proof
  • Rigid Base
General Specifications:
For use with close-coupled pumps having NEMA JP mounting and shaft dimensions. In such applications, the pump impeller is mounted directly on the motor shaft. Designed for continuous duty service. All motors listed are 1.15 Service Factor.
Unit of Measure

Base

 N/A Rigid Base

Enclosure Type

 N/A Drip-Proof

Phase

 N/A Single

HP

 N/A 10

RPM 60 Hz

 N/A 3450

Voltage

 N/A 230 V

FL Amps 230 V

 N/A 47.0

NEMA Frame

 N/A 215JP

Disc. Sym.

 N/A B

C Dimension

 N/A 15.67 in

Approx. Weight

 N/A 157 lbs

NEMA Service Factor

 N/A 1.15

Drip Cover Kit Ref.

 N/A C

Manufacturer

 N/A
Leeson

Mechanical Features

 N/A Open drip-proof construction with rigid base mounting. Locked bearing on shaft end limits axial shaft movement. For use where the environment is relatively clean and dry. For outdoor use, an enclosure or drip cover may be preferred. See the Drip Cover Kit table. Some 182-4JP frame motors have enclosed end shields as standard with frame meeting the 12º drip-proof requirement. No drip cover is needed, or shown in the table, for these motors.

Electrical Features

 N/A UL Recognized and CSA Certified. Single phase designs are capacitor start, induction run.