Request Information
3/4 HP, 1725 RPM, NEMA Frame 56HC, 208/230/460 V, TENV
  • Stainless Frame
  • Three Phase
  • TENV
  • C Face with Base

    Superior, extended life in severe environments
  • Paint-free exterior - stainless frame and conduit box lid, specially processed endshields and conduit box housing
  • Etched stainless steel nameplate
  • Proven WASHGUARD mechanical and electrical features
  • IRIS™ insulation system
  • BISSC certified for baking industry
  • Meets IP55 enclosure protection
  • Three phase motors are suitable for use on VFDs
  • 10:1 ratio for constant or variable torque at 1.0 SF

    LEESON Severe Duty, stainless frame, WASHGUARD II motors are designed for superior extended service in severe environments. Typical applications include food processing areas requiring frequent sanitation procedures using high pressure cleaning with concentrated caustic solutions, areas of high humidity and in chemical environments.

    .Standards and Approvals
    UL component recognized, file number E57948, guide number PRGY2. Energy efficiency ratings are verified by an independent testing laboratory. CSA Energy Efficiency Verification Program, report number EEV 78720-1. Construction is CSA Certified for safety report number LR33543. WASHGUARD II motors are certified to the Baking Industry Sanitation Standard #29 and listed under BISSC authorization number 769.
    • Unit of Measure

    Specifications

    Base

    		 N/A C Face with Base

    Enclosure Type

    		 N/A Totally Enclosed Non-Ventilated

    Phase

    		 N/A Three

    HP

    		 N/A 3/4

    RPM 60 Hz

    		 N/A 1725

    Voltage

    		 N/A 208 V230 V460 V

    FL Amps 230 V

    		 N/A 2.3

    % FL Eff.

    		 N/A 80.0

    NEMA Frame

    		 N/A 56HC

    Disc. Sym.

    		 N/A A

    C Dimension

    		 N/A 12.06 in

    Approx. Weight

    		 N/A 38 lbs

    Agency Approvals

    		 N/A
    BISSC Certified

    EPACT Mandates

    IRIS System

    Manufacturer

    		 N/A
    Leeson

    Features

    N/A

    • Combination 56H base motors have mounting holes for NEMA 56 and NEMA 143-145T and standard NEMA 56C face and shaft.