1 HP, 3450 RPM, NEMA Frame 56C, 208/230/460 V, TENV/TEFC
- All-Stainless
- Three Phase
- TENV/TEFC
- C Face less Base
- Meet EPACT for non-exempt when tested without shaft seals
- Total winding encapsulation using an Epoxy Resin
- LEESON’s exclusive IRIS™ Inverter- Rated Insulation System
- Motors are UL component recognized
- CSA Energy Efficiency Verification
- Construction is CSA Certified for more
1 HP, 3450 RPM, NEMA Frame 56C, 208/230/460 V, TENV/TEFC
- All-Stainless
- Three Phase
- TENV/TEFC
- C Face less Base
- Meet EPACT for non-exempt when tested without shaft seals
- Total winding encapsulation using an Epoxy Resin
- LEESON’s exclusive IRIS™ Inverter- Rated Insulation System
- Motors are UL component recognized
- CSA Energy Efficiency Verification
- Construction is CSA Certified for safety
- All exterior components are 300-Series stainless steel
- Protech Bearing isolator used for the output shaft seal
- Double Lip Viton shaft seal used on non-drive output shaft on TEFC motors
- Minimal exterior fasteners, no through bolt design and screw on conduit box covers
- Pre-lubricated double-sealed bearings
- Rotor/Cartridge, "Q-CAR", for quick access to bearings
- Rigid Cast Base for rugged applications
- Full fact nameplate is laser etched
- BISSC certified for baking industry
Unit of Measure
Specifications
Base |
N/A C Face Less Base |
Enclosure Type |
N/A Totally Enclosed Non-Ventilated |
Phase |
N/A Three |
HP |
N/A 1 |
RPM 60 Hz |
N/A 3450 |
Voltage |
N/A 208 V230 V460 V |
FL Amps 230 V |
N/A 2.6 |
NEMA Frame |
N/A 56C |
C Dimension |
N/A 10.97 in |
Approx. Weight |
N/A 47 lbs |
Manufacturer |
N/A
Loading zoom Leeson |