Specifications
Enclosure Type |
N/A Totally Enclosed Fan Cooled |
HP |
N/A 125 |
RPM |
N/A 1800 |
Voltage |
N/A 460 V |
FLA |
N/A 144.0 |
Nom. Eff. |
N/A 95.8 |
Guar. Min. Eff. |
N/A 95.4 |
Frame |
N/A 444T |
Price Symbol |
N/A G4-7UX |
C Dimension |
N/A 45.62 in |
Weight |
N/A 1970 lbs |
Norm. Stk. |
N/A Yes |
Certification |
N/A
 EIS Act 2007 Compliant  GEGARD 2400™  NEMA Premium |
Manufacturer |
N/A
 GE |
Standard Features
Poles |
N/A 2 4 6 8 |
Efficiency |
N/A Meets or Exceeds NEMA Premium nominal. Exceeds all NEMA Premium minimum efficiencies. |
Frequency |
N/A 60 Hz |
NEMA Design |
N/A B |
Agency Approvals |
N/A C-390 CSA - Motors UL - Component and Insulation System Recognition |
Altitude |
N/A 3300 ft |
Ambient Temperature |
N/A 40 ºC |
Balance/Vibration |
N/A ISO Grade 1, Ball Bearings: 0.040 in/sec (P) Roller Bearing:2P: 0.0003 in (P-P), 4P: 0.0004 in (P-P), 6P: 0.0005 in (P-P), 8P: 0.0007 in (P-P) |
Bearing Caps |
N/A Both ends are gasketed |
Bearing Housing Rise |
N/A 2-pole: 50°C, 4, 6, 8-pole: 45°C |
Bearing Protection |
N/A IP55, Inpro Seal both ends |
Bearing Type |
N/A Ball, Belted 4-pole |
Centered Core |
N/A Allows F1-F2 field conversion |
Conduit Box |
N/A Gasketed and rotatable, Cast iron |
Div. 2 Temp Codes |
N/A NEMA Design B motors have an Auto Ignition Temperature of 200°C stamped on the nameplate. A Division 2 Nameplate can be provided. |
Drains |
N/A Stainless Steel T-drains in lowest section of both endshields |
End Shield |
N/A Cast Iron |
Fan |
N/A Bronze Non-Sparking Plastic |
Fan Cover |
N/A Cast Iron |
Fasteners |
N/A SAE, Grade 5 |
Foot Draft Angle |
N/A ±1.5 º |
Foot Flatness |
N/A 0.005 in |
Frame Material |
N/A Cast Iron |
Grease |
N/A Polyurea |
Ground |
N/A Ground lug in Conduit Box and Frame ground |
Industry Specifications |
N/A Meets IEEE 45 Marine Duty Meets GM 7E-TA Automotive Duty |
Insulation Class |
N/A Class H |
Insulation System |
N/A GEGARD2400™. Non-Hygroscopic, Anti-Fungus, 2400 Volt or 2000 Volt @ 0.1 microsecond rise time. Exceeds NEMA MG1-31 |
Inverter Capabilities |
N/A Variable Torque inf:1, Constant Torque 20:1 |
L10 Bearing Life |
N/A Direct Coupled: 130000 hrs, Belted: 26280 hrs |
Lifting Means |
N/A 4 Lugs cast into frame |
Mounting |
N/A F1 as Standard and Modifiable to F2 |
Mounting Holes |
N/A 2 per foot |
Nameplate |
N/A Stainless Steel includes Weight, 3/4 Load Efficiency, Vibration Limit |
Oil Mist Lube |
N/A Includes provisions for conversion to Oil Mist Lubrication |
Paint |
N/A Buff, Epoxyester |
Relubrication |
N/A Both ends, extended through the fan cover |
Service Factor |
N/A Cast Aluminum |
Service Factor |
N/A 1.15 |
Shaft TIR |
N/A Meets IEEE 841, 0.001 in for shaft diameter 1.625 in and smaller, 0.0015 in for shaft diameter greater than 1.625 in. |
Special Painting |
N/A Meets IEEE 841 |
Tach Mounting |
N/A Tach kits for field modifications are available |
| Temperature Rise1 | N/A 80 ºC |
Tests |
N/A NEMA Routine Report including Vibration supplied with motor, IEEE 112 |
Time Rating |
N/A Continuous |
Vibration Pads |
N/A Cast in vibration pads for repeatable measurements |
Warranty |
N/A 60 months from date of purchase or 66 months from date of shipment, whichever occurs first |
- 1 At 1.0 SF
