Specifications
Base |
N/A Rigid Base |
Enclosure Type |
N/A Drip-Proof |
Phase |
N/A Three |
HP |
N/A 10 |
RPM 60 Hz |
N/A 3450 |
Voltage |
N/A 208 V230 V460 V |
FL Amps 230 V |
N/A 25.0 |
% FL Eff. |
N/A 82.5 |
NEMA Frame |
N/A S213JM |
Disc. Sym. |
N/A B |
C Dimension |
N/A 16.82 in |
Approx. Weight |
N/A 96 lbs |
NEMA Service Factor |
N/A 1.15 |
Drip Cover Kit Ref. |
N/A C |
Rating |
N/A Inverter Rated |
Mechanical Features |
N/A
Open drip-proof construction, cooling air exhausts at the shaft end for maximum cooling. Oversized locked bearing on shaft end limits axial shaft movement. Drip covers are available as accessory kits for 143-5JM and 182- 4JM motors for the correct kit. Some 182-4JM frame motors have enclosed endshields as standard with frame vents meeting the 12ยบ drip-proof requirement. No drip cover is needed, or shown in the table, for these motors. |
Electrical Features |
N/A High efficiency copper windings with NEMA 1.15 service factors. UL and CSA recognized designs. Single phase designs are capacitor start/induction run unless indicated otherwise. |
Manufacturer |
N/A
 Leeson |
