COMPANY HEADER
Print Back
  • All-Stainless
  • Three Phase
  • TENV/TEFC
  • C Face less Base
Revolutionary Designed Stainless Steel Motors are built to be the last Stainless Steel Washdown motors you will ever need.
  • Meet EPACT for non-exempt when tested without shaft seals
  • Total winding encapsulation using an Epoxy Resin
  • LEESON’s exclusive IRIS™ Inverter- Rated Insulation System
  • Motors are UL component recognized
  • CSA Energy Efficiency Verification
  • Construction is CSA Certified for safety
  • All exterior components are 300-Series stainless steel
  • Protech Bearing isolator used for the output shaft seal
  • Double Lip Viton shaft seal used on non-drive output shaft on TEFC motors
  • Minimal exterior fasteners, no through bolt design and screw on conduit box covers
  • Pre-lubricated double-sealed bearings
  • Rotor/Cartridge, "Q-CAR", for quick access to bearings
  • Rigid Cast Base for rugged applications
  • Full fact nameplate is laser etched
  • BISSC certified for baking industry
Leeson Three Phase TENV/TEFC C Face Less Base Washguard All-Stainless Motors
Unit of Measure
1 

Item #

HP

RPM 60 Hz

Voltage

FL Amps 230 V

NEMA Frame

C Dimension

117126 N/A 1/2 N/A 3450 N/A 208 V230 V460 V N/A 1.6 N/A 56C N/A 10.47 in
117127 N/A 1/2 N/A 1750 N/A 208 V230 V460 V N/A 1.6 N/A 56C N/A 10.72 in
117128 N/A 3/4 N/A 3450 N/A 208 V230 V460 V N/A 2.4 N/A 56C N/A 10.47 in
117129 N/A 3/4 N/A 1750 N/A 208 V230 V460 V N/A 2.3 N/A 56C N/A 11.22 in
117130 N/A 1 N/A 3450 N/A 208 V230 V460 V N/A 2.6 N/A 56C N/A 10.97 in
117131 N/A 1 N/A 1750 N/A 208 V230 V460 V N/A 3.0 N/A 56C N/A 11.97 in
121750 N/A 1 1/2 N/A 3450 N/A 208 V230 V460 V N/A 4.0 N/A 143TC N/A 11.00 in
121751 N/A 1 1/2 N/A 1750 N/A 208 V230 V460 V N/A 4.4 N/A 145TC N/A 11.25 in
121742 N/A 2 N/A 3450 N/A 208 V230 V460 V N/A 5.2 N/A 145TC N/A 12.50 in
121743 N/A 2 N/A 1750 N/A 208 V230 V460 V N/A 5.6 N/A 145TC N/A 12.50 in
Unit of Measure
1