5 HP, 230 V

Dynamic Braking allows for faster deceleration rates then could be achieved via a coast to stop. Dynamic braking consists of the internal drive brake chopper and separate add-on dynamic braking resistors.

Important application notes:
  • The AF-60 LP Micro Drive dynamic braking can be used for stopping a load with an inertia equal to or less than the applied motor's rotor inertia.
  • High inertia or overhauling loads may cause extended deceleration times which could cause overheating and tripping of the drive.
  • The dynamic braking is not a holding brake. It does not prevent a motor at rest from rotating.
Note: Refer to the drives' Operating Instruction for installation and connection details.
Unit of Measure

Specifications

Duty Cycle

N/A 10 %

Voltage (AC)

N/A 230 V

Nominal Applied Motor HP

N/A 5

Max. Braking Torque

N/A 150 %

Brake Chopper

N/A Built-in

Quantity Required

N/A 1

Total Ohms

N/A 25

Total kW

N/A 0.8