2 HP, 230 V

Dynamic Braking allows for faster deceleration rates then could be achieved via a coast to stop. Dynamic braking consists of the internal drive brake chopper and separate add-on dynamic braking resistors.

Important application notes:

• The AF-60 LP Micro Drive dynamic braking can be used for stopping a load with an inertia equal to or less than the applied motor's rotor inertia.
• High inertia or overhauling loads may cause extended deceleration times which could cause overheating and tripping of the drive.
• The dynamic braking is not a holding brake. It does not prevent a motor at rest from rotating.

Note: Refer to the drives' Operating Instruction for installation and connection details.