Dynamic Braking allows for faster deceleration rates then could be achieved via a coast to stop. Dynamic braking consists of the internal drive brake chopper and separate add-on dynamic braking resistors.
Important application notes:
The AF-60 LP Micro Drive dynamic braking can be used for stopping a load with an inertia equal to or less than the applied motor's rotor inertia.
High inertia or overhauling loads may cause extended deceleration times which could cause overheating and tripping of the drive.
The dynamic braking is not a holding brake. It does not prevent a motor at rest from rotating.
Note: Refer to the drives' Operating Instruction for installation and connection details.
