COMPANY HEADER
Print Back
Dynamic Braking allows for faster deceleration rates then could be achieved via a coast to stop. Dynamic braking consists of the internal drive brake chopper and separate add-on dynamic braking resistors.

Important application notes:
  • The AF-60 LP Micro Drive dynamic braking can be used for stopping a load with an inertia equal to or less than the applied motor's rotor inertia.
  • High inertia or overhauling loads may cause extended deceleration times which could cause overheating and tripping of the drive.
  • The dynamic braking is not a holding brake. It does not prevent a motor at rest from rotating.
Note: Refer to the drives' Operating Instruction for installation and connection details.
Unit of Measure
1 

Item #

Duty Cycle

Voltage (AC)

Nominal Applied Motor HP

Max. Braking Torque

Total Ohms

Total kW

List Price

DB2104TBNC N/A 10 % N/A 230 V N/A 2 N/A 150 % N/A 65 N/A 0.25 $400.00
DB2105TBNC N/A 10 % N/A 230 V N/A 3 N/A 150 % N/A 50 N/A 0.285 $400.00
DB2106TBNC N/A 10 % N/A 230 V N/A 5 N/A 150 % N/A 25 N/A 0.8 $450.00
DB2404TBNC N/A 40 % N/A 230 V N/A 2 N/A 150 % N/A 65 N/A 0.8 $600.00
DB2405TBNC N/A 40 % N/A 230 V N/A 3 N/A 150 % N/A 50 N/A 1 $600.00
DB2406TBNC N/A 40 % N/A 230 V N/A 5 N/A 150 % N/A 25 N/A 3 $675.00
DB4103TBNC N/A 10 % N/A 460 V N/A 2 N/A 150 % N/A 310 N/A 0.25 $525.00
DB4104TBNC N/A 10 % N/A 460 V N/A 3 N/A 150 % N/A 210 N/A 0.285 $525.00
DB4105TBNC N/A 10 % N/A 460 V N/A 5 N/A 150 % N/A 110 N/A 0.6 $600.00
DB4106TBNC N/A 10 % N/A 460 V N/A 7.5 N/A 150 % N/A 80 N/A 0.85 $850.00
DB4107TBNC N/A 10 % N/A 460 V N/A 10 N/A 150 % N/A 65 N/A 1 $950.00
DB4403TBNC N/A 40 % N/A 460 V N/A 2 N/A 150 % N/A 310 N/A 0.8 $788.00
DB4404TBNC N/A 40 % N/A 460 V N/A 3 N/A 150 % N/A 210 N/A 1.35 $788.00
DB4405TBNC N/A 40 % N/A 460 V N/A 5 N/A 150 % N/A 110 N/A 2.4 $900.00
DB4406TBNC N/A 40 % N/A 460 V N/A 7.5 N/A 150 % N/A 80 N/A 3 $1,275.00
DB4407TBNC N/A 40 % N/A 460 V N/A 10 N/A 150 % N/A 65 N/A 4.5 $1,425.00
Unit of Measure
1